sub choice factoring in ohms

  • 3
    Participant count
  • Participant list
Alright here goes. Right now I have 2 obsifian d4 12s. I'm going to be adding a 3rd sub. Going to be powering them with a soundstream rub1.2500.

My question is should I just add another d4 sub and wire them to .67 ohm and hope for box rise to get me over the 1ohms that the amp is stable at so I can get the full potential of the amp

Or should I sell mine and get the 3 d2 obsidians a buddy of mine has and wire them to 1.34, knowing I'm going to have box rise and won't be getting all I can get out of the amp. Going this route I know I'm safe, it'll be easier on my electrical and I'll still be getting 1700ish watts Rms which is around 566 to each sub.

I'm only going to be running 1 yellow top in the back. stock battery I. the front and some 0 gauge cca for wire.

 
Alright here goes. Right now I have 2 obsifian d4 12s. I'm going to be adding a 3rd sub. Going to be powering them with a soundstream rub1.2500.
My question is should I just add another d4 sub and wire them to .67 ohm and hope for box rise to get me over the 1ohms that the amp is stable at so I can get the full potential of the amp

Or should I sell mine and get the 3 d2 obsidians a buddy of mine has and wire them to 1.34, knowing I'm going to have box rise and won't be getting all I can get out of the amp. Going this route I know I'm safe, it'll be easier on my electrical and I'll still be getting 1700ish watts Rms which is around 566 to each sub.

I'm only going to be running 1 yellow top in the back. stock battery I. the front and some 0 gauge cca for wire.
what size alt

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

If I recall, there ae quire a few made just for the tesla Y, all the tesla s for that matter...
1
31
One or two, they are still subwoofer outs and are mono summed signals from both left and right. Even the 2 RCA subwoofer pre-outs on the 2nd one...
3
72
Using a Y RCA to split signal from amp to amp to give both amps the signal they need from the HU and subs in different /separate enclosures tuned...
3
514

About this thread

obsidianbasshed

Junior Member
Thread starter
obsidianbasshed
Joined
Location
nash,texas
Start date
Participants
Who Replied
Replies
3
Views
885
Last reply date
Last reply from
obsidianbasshed
1714321195129.png

Doxquzme

    Apr 28, 2024
  • 0
  • 0
1714321134050.png

Doxquzme

    Apr 28, 2024
  • 0
  • 0

Latest topics

Top