Sub buzzing/humming noise

  • 3
    Participant count
  • Participant list
I have a jl audio 500/1 v2 amp and right now I have a kicker l5 10" hooked up to it. I haven't had a problem with it until one day the sub cut out. Later I went to the trunk and the low ohm light was on the amp and there was a hum noise coming from the l5. I quick checked all the wires and everything looked okay. I unhooked the sub and the light came off. I Hooked up a different sub I have and it sounded fine and the ohm light wasn't on. I haven't looked into it further yet but is it safe to say the l5 is blown?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
231
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
554
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
586

About this thread

Tshaffe

Member
Thread starter
Tshaffe
Joined
Location
☁️
Start date
Participants
Who Replied
Replies
5
Views
1,177
Last reply date
Last reply from
Tshaffe
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top