dacheatham 10+ year member
CarAudio.com Veteran
Item(s) for Sale:
1. Streetwires Dist Block - Does power and ground. 1/0 in (4) 4awg out for each. Included maxi fuses 100a, 80a and 40a. Very nice piece
2. Other blocks - Funkin Audio ANL w/100a, Xscorpion gound 1/0 in, 4awg out, Funkin Audio Ground - 4awg in, 8 awg out, misc ANL inline missing one of the plastic screwdown end pieces
3. Cache LOC w/line driver
4. Crossfire CTA2120 - 120x2, one channel is out but still plays bridged
5. Walmart DMM
6. Unopened soldering iron with solder
7. Pioneer Premier xovers - Missing a few screws
8. 2 unopened rolls of double sided mounting tape
9. Knu Speakerwire Boots, 1 inch cable clamps, several short pieces of loom
10. Wire
Power - 4awg - 1run of FA ~15ft, 1 run of KNU around 8ft, 1 run FA around 4, 1run KNU around 4 and several smaller pieces
8awg - Several pieces, good for amps to dist block or possibly speaker wire
Speaker Wire - 16awg diyma - ~20ft on the roll, 4 pieces 10-12ft, several smaller pieces
14AWG scosche - Several pieces, none super long
RCA - 12ft - 2 scosche
- 17ft - 1 Fosgate
- 3ft - 3 DIYMA Rope
- 3ft - 3 KNU Basic
And another pile of misc wires, nothing special
Item(s) Description/Condition:
It is all used, any issues are noted above
Price: $110 plus shipping
Shipping and Miscellaneous Item Information: Probably around 25-30
View attachment 26544616View attachment 26544617View attachment 26544618View attachment 26544619View attachment 26544620View attachment 26544621View attachment 26544622View attachment 26544623
Item Pictures: Additional thread for remaining pics
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
1. Streetwires Dist Block - Does power and ground. 1/0 in (4) 4awg out for each. Included maxi fuses 100a, 80a and 40a. Very nice piece
2. Other blocks - Funkin Audio ANL w/100a, Xscorpion gound 1/0 in, 4awg out, Funkin Audio Ground - 4awg in, 8 awg out, misc ANL inline missing one of the plastic screwdown end pieces
3. Cache LOC w/line driver
4. Crossfire CTA2120 - 120x2, one channel is out but still plays bridged
5. Walmart DMM
6. Unopened soldering iron with solder
7. Pioneer Premier xovers - Missing a few screws
8. 2 unopened rolls of double sided mounting tape
9. Knu Speakerwire Boots, 1 inch cable clamps, several short pieces of loom
10. Wire
Power - 4awg - 1run of FA ~15ft, 1 run of KNU around 8ft, 1 run FA around 4, 1run KNU around 4 and several smaller pieces
8awg - Several pieces, good for amps to dist block or possibly speaker wire
Speaker Wire - 16awg diyma - ~20ft on the roll, 4 pieces 10-12ft, several smaller pieces
14AWG scosche - Several pieces, none super long
RCA - 12ft - 2 scosche
- 17ft - 1 Fosgate
- 3ft - 3 DIYMA Rope
- 3ft - 3 KNU Basic
And another pile of misc wires, nothing special
Item(s) Description/Condition:
It is all used, any issues are noted above
Price: $110 plus shipping
Shipping and Miscellaneous Item Information: Probably around 25-30
View attachment 26544616View attachment 26544617View attachment 26544618View attachment 26544619View attachment 26544620View attachment 26544621View attachment 26544622View attachment 26544623
Item Pictures: Additional thread for remaining pics
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
