SSA Demon (10" & 12")

[2RZ-FE 10+ year member]

Ace is close and the only place in town. HD, Lowes, JoAnn and Michaels are in Vacaville 10+ miles. I'll find it.

 

[shredder2]

Ace is close and the only place in town. HD, Lowes, JoAnn and Michaels are in Vacaville 10+ miles. I'll find it.

Wooden closet hangar pole?

You'll find something that'll work... remember it does not got to be exactly 1.5"

Maybe like this?

https://www.homedepot.com/p/Alexandria-Moulding-WM-231-1-1-2-in-x-1-11-16-in-x-96-in-Pine-Handrail-Moulding-0W231-20096C/205916987

$18 tho... I'd just make my own if it was me... 

 

[2RZ-FE 10+ year member]

That stuff is round and a flat section so not completely round. I can find closet hanger but usually 1.25"

 

[shredder2]

This ought to work...

https://www.acehardware.com/departments/building-supplies/lumber-and-trim/moldings-and-trim/5432208

The stuff is for bracing, you got a lower powered setup... no need to be too picky

I just make my own if I got cutoffs laying around

That's close enough, and works well in my experience

 

[2RZ-FE 10+ year member]

Found 1 3/8 x 5 ft closet dowel for $9 at Ace. Good enough. 

 

[denim 5,000+ posts]

Looking good.

 

[2RZ-FE 10+ year member]

Box is done letting it dry overnight.

Hopefully it's what I want if not have plenty of MDF left over...lol

 

[fithwheel]

You should build another 1 sometime anyway. Sounds like you got enough designs 

 

[2RZ-FE 10+ year member]

 Does this sub qualify for a T line? Lol

 

[shredder2]

Hopefully it's what I want if not have plenty of MDF left over...lol

T-line?... enclosure is not to your liking?

 

[2RZ-FE 10+ year member]

Have not installed it yet maybe tomorrow. 

He said I should make another box anyway so I asked if it qualifies for a t line. Even if it does way too large. 

 

[denim 5,000+ posts]

Yeah, T-lines for a 10" sub and larger, is not practical for a car audio environment.  I did a few with 8's, and they took up a load of space.

 

[2RZ-FE 10+ year member]

Box is in and sounds good. Just the type of drum kick I was looking for. NWA hit well also. Thanks again.

 

[shredder2]

You chose the conservative design... I would have gone bigger personally. More output!

Glad it worked out

 

[denim 5,000+ posts]

That's awesome to hear you are happy with the performance. 





That being said, you can improve it some more with some deadener in that trunk.