SQ setup for 93 Ranger reg cab..

Originally posted by RangerMan That would be an awesome setup...Ben (owner of Elemental Designs) is having some sub/amp combo deals that will be hitting the net on Monday or Tuesday. You can get 2 12s and an an Avonixx (sp?) amp for 800 bucks...that is a helluva deal.

 

Another consideration you might want to look into is putting a 10 in a the cab, and a 15 in the bed both running of seperate amps. Therefore, it is loud enough for you in the cab, and loud enough to piss people off outside...just a couple of suggestions.

 

By the way, LoneRanger is right, don't let people tell you what you can and can't do. I know I had over 50 people tell me I was crazy for even attempting to put a 15 in my Ranger, but I did. Fiberglass is an awesome thing!

lol, thanks,

im not sure if i could afford $800 tho..

i am thinking this might work for a box if i decided not to make one myself:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1389427712

Inside volume is 1.0cf per chamber.

Aproximate Size: 48"L X 14"H X 9"BD X 5"TD.

with 2 K series 12"s and either Avonixx (sp?) or jbl 600.1 through my jvc sk780 deck... ?

do you think this wiring would do?

pyramid 4 guage with 60 amp fuse.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1389385321

 
i am almost positive it would, I would just have to scoot up all the way... (i already am with the speakers behind the seats i have right now...)

do you have any other suggestions anyone???

infiinti kappa perfect ?

Elemental designs K series?

Alpine Type-R?

 
that box won't fit. it's 14" tall. If you didn't notice, there's an indent between the floor and the back window that's 12.5" tall and about 2" deep at the top. That box will be too tall to fit in there.

 
like i said i would just have to lean forward a bit //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. ill go out and measure it today to make sure tho.

 
Originally posted by LoneRanger that box won't fit. it's 14" tall. If you didn't notice, there's an indent between the floor and the back window that's 12.5" tall and about 2" deep at the top. That box will be too tall to fit in there.
That is what I was thinking...mine is 13 inches tall

 
i measured it... it will fit.

thanks for all the help. if you have any suggestions, please do tell //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
699
I had some 9500 series 12s by MTX that were some slamming subs!! Should have kept those along with those torpedo RE XXX 12s
15
1K
I am doing an all JL audio instal on my new F250 SD . I'm using a Audio Control LC 5i Pro with a JL Audio XDM 700/5 and C3-650's in all 4 doors...
7
982
Id sit down and figure out exactly what all you will be installing for amperage consumption and add another 10-15% amperage useage on top of that...
21
2K

About this thread

a1leyez0nm3

10+ year member
Junior Member
Thread starter
a1leyez0nm3
Joined
Location
seattle
Start date
Participants
Who Replied
Replies
21
Views
1,452
Last reply date
Last reply from
a1leyez0nm3
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top