***SPLluminators 149.9 Bassrace Wall Build***

[813thumper 10+ year member]

that chick is hawwtttt. you need to get after that.

 

[SPLluminator 10+ year member]

Thats my sis bro. And i hear that a lot lol.

 

[Mr. Slate 10+ year member]

Very nice build.

 

[SPLluminator 10+ year member]

Ok guys, i havent been on the forums much lately but im back. I got the other amp in just the other day and it pounds. Its easily at 150-152+ with the window down tuned at 31hz. Im also getting a ton of flex on the baffle(1/8th to a 1/4" movement) even though it is 2.25" thick.

Heres the list of to-do's:

*3/4" all-thread through the front to the back

*Seal off around the faceplate

*Build a larger port(13" or so) tuned around 31, and another around 36(currently i only have 7.75 sq in. of port per cube).

*Resin the inside/outside(possibly if it gets warm enough and i need that extra .1 or so)

*Get the 220A alt in(stock is still in)

*Do the big 3

Any other ideas to gain? There is a lot of room for improvement thats for sure, just looking for opinions.

 

[JL Audio 5,000+ posts]

make pods for the 10's !! im running 8 tens and 4 st350's ! !
edit sik wall so far tooo ! ! tuned !

I had 48 st350s a while back :/ ... woot. Sold them all on here too //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[SPLluminator 10+ year member]

I had 48 st350s a while back :/ ... woot. Sold them all on here too //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Thats just nuts. No need for that in my app. Im happy with my 10's and ST350's. However itd be nice if i coudl adjust my Xover slopes on the Imprint(dont know how?)

 

[JL Audio 5,000+ posts]

Thats just nuts. No need for that in my app. Im happy with my 10's and ST350's. However itd be nice if i coudl adjust my Xover slopes on the Imprint(dont know how?)

I didn't own a single mid at that time either lol.. owned 48 of those, 2 stetsom 7kds, a sundown proto 50.4 no labels and a sundown 3k, sold it all and traded the van //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[SPLluminator 10+ year member]

lol thats crazy. Itd be soo loud but soo unnecessary

 

[SPLluminator 10+ year member]

Did a lot of tuning today, the front stage sounds much, much better now

 

[skadude016 5,000+ posts]

was it hard taming those st350's?

 

[SPLluminator 10+ year member]

Not at all.

 

[iamamp3pimp 5,000+ posts]

SOB, look at you keeping your seat belts.

now why didnt i think of that.

Well i ****ed up on the door pods. I used spray adhesive to hold the fleece on instead of CA glue like usual, and it pulled up once it got saturated. Of course this was after i completely saturated the whole thing. Its drying now and im just hoping they turn out ok. If not it was a LOT of wasted resin. Im sticking with the usual T-shirt and CA glue from now on. Works much better than what these forum guys recommend. lol.

never tried the CA, staples or hot glue ftw.

Impressive build.

 

[SPLluminator 10+ year member]

SOB, look at you keeping your seat belts.

now why didnt i think of that.

never tried the CA, staples or hot glue ftw.

Impressive build.

Means a lot coming from an expert like yourself. Got any ideas on how to gain?

 

[iamamp3pimp 5,000+ posts]

well you only have one amp on there if i read that right, those numbers on one amp are pretty **** good.

maybe if you 45 the edges on the inside....i saw you put a small one there, but if you made it so that there was no stepdown, that "may" help. is there any kind of flare on your port?

 

[iamamp3pimp 5,000+ posts]

Means a lot coming from an expert like yourself. Got any ideas on how to gain?

Thanks btw.