Hey there guys, hope someone can help me wrap my head around this.
I have a 2012 Mazdaspeed3 and I'm working on upgrading the speakers. Now, my car has the premium Bose set up. I just want to get these new speakers set up.
The stock speakers have a molex plug to connect it to the wiring harness. I'm assuming I need to tap into it, but the problem is, there are four wires running into the molex connector. I have a couple pictures here:
(Check reply)
There are four wires -- yellow, purple, white with green, and green. I haven't taken a look at the other doors just yet, but I'm wondering since typically speakers only have two wires, where do I go from here?
Has anyone done an install like this? If you have any tips or advice about how I need to approach this I would love to hear it. I have taken a look around and tried to search but I'm drawing a blank.
Thanks people!
---------- Post added at 01:03 PM ---------- Previous post was at 01:02 PM ----------
How do I post images? I keep getting this error:
Post denied. New posts are limited by number of URLs it may contain and checked if it doesn't contain forbidden words.
I've tried to edit in a single link, and also tried editing in two picture urls. Can't make it happen. :|
