pimpnyou204
10+ year member
Senior VIP Member
Got a tc 3000 3hp motor and got it reconed into a 15. Spl recommends 3.25 cubes tuned to 32-35 but I wanna go a lil lower right about 29. I can't go over 16 height without being a really nondeep box and this will be a wall since thats what works the best.
Dimensions
16 height
29 wide
22 deep
=4.73 cubes and with a 4.5 wide port I'd have 65 port are which would be 14.4 per cube.
Now tuning at 29 I'd be sitting at 39 long port taking up pretty much my side and all the back of my box. How do u think these dimensions would work with the box and sub?
Also I ride with one seat down which would u put in the opening.. sub or port or sub and port on the same side venting thru?
Dimensions
16 height
29 wide
22 deep
=4.73 cubes and with a 4.5 wide port I'd have 65 port are which would be 14.4 per cube.
Now tuning at 29 I'd be sitting at 39 long port taking up pretty much my side and all the back of my box. How do u think these dimensions would work with the box and sub?
Also I ride with one seat down which would u put in the opening.. sub or port or sub and port on the same side venting thru?
Last edited by a moderator: