Sound deadener and U.

[Looney_Tune 10+ year member]

How many SQ. FT of sound deadener do u have in ur trunk and how thick is it? And most importantly...is most of the trunk lid rattle gon? Im thinkin bout gettn 22SQ FT of 80mil deadener and just puttin it all on my trunk lid. What u thank

Click to read more...

 

[Looney_Tune 10+ year member]

Also if u got a good amount for sale LMK!

 

[Looney_Tune 10+ year member]

cmon now. would yall say 22 SQ FT on my small trunk lid, (infiniti J30) be a decent amount to get rid of a good amount of my trunk lid rattle? Im tryna get it today but want to get an opinion from yall if it would be worth it.

 

[sdmtnbiker420 10+ year member]

22 sq feet is a grip, youll definitely have enough to do one layer in your entire trunk (not just trunk lid)

 

[Looney_Tune 10+ year member]

Should two layers on the trunk lid be good? I dont want to buy the stuff and hear the same amount of rattle as when it was off, or even close to the same amount of rattle for dat matter...22 SQ FT on the trunk lid, I should less/no trunk rattle correct?

 

[funkdoktor 10+ year member]

depends how good you apply it....u can't take out 100% of the rattling but a good amount will be gone if applied correctly to the right places....

 

[Looney_Tune 10+ year member]

ok so 22 SQ FT on just the trunk lid placed properly, I should hear a decent difference correct?

 

[funkdoktor 10+ year member]

correct....u might not even need that much....but, its up to you on how much you wanna use...

 

[Looney_Tune 10+ year member]

correct....u might not even need that much....but, its up to you on how much you wanna use...

Is there a possibility I may need more...I got a 15" SX ported off a BX1500D.

 

[Looney_Tune 10+ year member]

Also, about how many SQ FT would equal up to a gallon of eDead V3? Is either of them more effective than the other?

 

[funkdoktor 10+ year member]

they both have their pros and cons...do some research...hopefully someone with more experience than me can handle your questions better.....

 

[dride 10+ year member]

gotta 96 acura tl..and it rattles like no other on some notes..sounded like my exhaust or some other metal was vibrating..but today i sat on my trunk lid while i was slappin and the rattle was almost completley gone so im gunna deaden the shit outa that b4 i do the entire trunk..let me know how it goes

 

[Looney_Tune 10+ year member]

ok...and I seen that the V3 does about 50 SQ FT. Im either gonna get the V3 liquid or 40SQ FT of 80mil deadener.

 

[ChaseBimmer 10+ year member]

I would reccommend Raamat. Raamaudio.com.. I just used 2 rolls (65sq ft. each) in my truck and this stuff is amazing! It sticks really good and is very flexible.. It is also cheap, $130 shipped for 65 sq ft. of Butyl based deadener..

And I would do more then one layer.. I'd prob go overboard if it was mine and do 2-3. I put 5 layers on my roof to get the flex out.

 

[gijoe 10+ year member]

I'd personally do a layer over the entire trunk before you start putting multiple layers on the lid. You're entire trunk creates a ton of noise, not just the lid. Even if you were to get the lid silent you would still hear all of the other rattles and buzzes loud and clear. That's my opinion on sound deadening. Cars are noisy everywhere, once you kill one problem area you hear the others more clearly.