I have 18" high by 38" wide by 20" deep to work with. Using 1" mdf and the measurements of 18x35.75x18 the internal volume is 5 cubes. How can I build a vented 5 cube internal volume enclosure tuned to 35 hertz with the sub mounted in the middle of the box (kickers reccomended size and tuning? Maybe I should pay someone on here to design it. I'll be sending it 4000 watts rms from a memphis mojo. I'd love to hit 150 db as long as the box doesnt destroy the sub on daily use.
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
- Locked
Clearing out storage. $75 + shipping. Located in Carlsbad, CA. Pick up OK. Shipping weight is probably around 13 pounds. Slightly to deep to...
- Started by SnoringDad
- Car Audio Classifieds
Watch the video pop put up. Those don't put up anywhere near what they claim. Hence why spokey said run it at 1 ohm.
- Started by Bob Ross
- Wiring, Electrical & Installation
I wouldnt think so.only way to find out is trial and error
- Started by Blackout67
- Enclosure Design & Construction
About this thread
New threads
-
unwanted loud constant bass when i turn up my gain on my ampSubs play to the beat with gain low but if I turn it up my...- Started by Adam Spiekerman
- Replies: 0
-
unwanted loud constant bass when i turn up my gain on my ampSubs play to the beat with gain low but if I turn it up my...
- Started by Adam Spiekerman
- Replies: 0
-
Thoughts Before I BuyFound this on Facebook marketplace for only $100. Guy says...
- Started by Blackout67
- Replies: 2
-
Help with adding an aftermarket amp /speakers/sub 2019 EquinoxI have a 2019 Equinox (non Bose)(RPO code IOU)i want to keep...
- Started by cdreece
- Replies: 1
-
Low volume ONLY while drivingI have a Skar svr-10 inch sub and a skar rp-800.1d 800w rms...
- Started by Maddoxp07
- Replies: 2