helotaxi
5,000+ posts
Kilroy was Here
The punch 60 is only about 50% efficient so it would only be putting out in the nieghborhood of 225W at that current draw. Those amps were quite underrated, so that is not entirely unheard of for a 3 ohm load. You can reach the mechanical limits of the W6v1 with only 150W in a small sealed enclosure, so you should be getting the most of it with that power. I never ran more than about 150 to mine and they pretty well got off.
If you check JLs website you will find no mention anywhere of a D3 sub. Only D2, D4, D6, D1.5 and the W5 series @ D8.
If you check JLs website you will find no mention anywhere of a D3 sub. Only D2, D4, D6, D1.5 and the W5 series @ D8.