dragnix 5,000+ posts
LXIX
Here's the deal, I have some Mach5 mli65 that i was going to put into the doors. But then today i discovered that it won't fit because the hole is basically too small and the frame gets caught.
So now i need new mids(unless someone can tell me how to fit them without hacking up the doors) and they have to be pretty shallow or have a small enough frame so that it can squeeze through the door. Budget is about 100 bux a pair and i'm looking for decent midbass, but door is deadened so i should be good //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
So now i need new mids(unless someone can tell me how to fit them without hacking up the doors) and they have to be pretty shallow or have a small enough frame so that it can squeeze through the door. Budget is about 100 bux a pair and i'm looking for decent midbass, but door is deadened so i should be good //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif