Six Speaker Setup

[robbythedude]

Hey,

I got 2x SQ Super Tweeters and 4x Pro Audio 6.5"s on the SQ90.4 Amplifier.

Amp: Q4-90

The amplifier has the ability to adjust High/Low Pass on Chan. 1/2 and 3/4 separately. I understand that I am going to wire my two rear door speakers to channel 3/4 and tune appropriately.

NOW, how do I wire the two door speakers and tweeters? And how do I tune them?

Thanks,

Rob

Click to read more...

 

[big scott]

Hey,
I got 2x SQ Super Tweeters and 4x Pro Audio 6.5"s on the SQ90.4 Amplifier.

Amp: Q4-90

The amplifier has the ability to adjust High/Low Pass on Chan. 1/2 and 3/4 separately. I understand that I am going to wire my two rear door speakers to channel 3/4 and tune appropriately.

NOW, how do I wire the two door speakers and tweeters? And how do I tune them?

Thanks,

Rob

wire 2 6.5 together for a 2ohm load. run them to 1 ch. so all 4 6.5 going to 2 ch of the amp.

and run 1 tweeter to 1 ch and other tweeter to other ch.

so 2- 6.5's to 1 ch.

and 1 tweeter to 1 ch.

set the tweeter ch to high pass

set the 6.5 ch's to band pass and set the high and low pass for them.

i have my sq tweeters crossed at 3k ( i would do 5k if my amp would do that )

and my sq 6.5 are 250hz to 3k band pass.

and so you know i have 8" woofers in my door. im running then at 60hz to 250hz. and my sub at 25hz to 60hz.

but you can overlap the crossovers.

 

[robbythedude]

You are the best, thanks so much.