screwed up hole for one of my subs.

[tank65 10+ year member]

well everything went perfect on my box............til i put one of the subs in and i cut out to much on the circle...i have no clue how i missed that but i did.

whats the easiest way to solve this problem without replacing the whole front panel?

basically the sub will sit in the hole fine but if i were to put in screw it would probably come out the side of the wood.

should i just do some predrills at a slight angle so my screws will catch all of the wood? thats the only thing i can think of right now and i think it should work.

if not, i might just have to cut a square out around the bare minimum of the cricle and just inster another piece flat with it, then glue it put some brackets on it and seal it.

but i just need some other suggestions if you got em

Click to read more...

 

[90accordman 5,000+ posts]

no , you should just not half *** it and redo the front panel

 

[AJ²06 5,000+ posts]

no , you should just not half *** it and redo the front panel

x2 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif DO IT right the FIRST time. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[90accordman 5,000+ posts]

i mean if you must be lazt slap another front on top of it and recut the holes then your not tearing anything apart and you have a thicker front

 

[tank65 10+ year member]

yeah i think im just going to do that, simple enough of a solution if i have enough spare wood layin around lol

 

[Fast1one 10+ year member]

i mean if you must be lazt slap another front on top of it and recut the holes then your not tearing anything apart and you have a thicker front

Thats what I do all the time lol...recycle old boxes and sell them to friends FTW //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

 

[OneKrazyKeebler 10+ year member]

It depends what it is goin in.

If it is a standard cab truck, you might not have enough room to do a double baffle. If space is not a problem, double that bithc up FTW.

 

[Cahm Rohn 10+ year member]

15 MT, 13.5 in. space, tripple baffle+some glassing= 1 sick box looks good so far though

 

[iamamp3pimp 5,000+ posts]

thats the best way is double baffeling it.

 

[jeeper07 5,000+ posts]

Thats what I do all the time lol...recycle old boxes and sell them to friends FTW //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

same always works //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif

 

[tank65 10+ year member]

in the process of doubling up the front. i scrapped a prefab box to do it to lol, it was a shitty *** box anyway

 

[Ctminime 10+ year member]

90accordman i LOVE your avatar drunk chicks making out FTMFW!

 

[PowerNaudio 10+ year member]

you could of always glued a small piece of 3/4" mdf to the back where hole sits redrilled the hole and just use a 3/4" longer screw.

but double baffle is a good idea if you have the space.

laters

 

[90accordman 5,000+ posts]

90accordman i LOVE your avatar drunk chicks making out FTMFW!

they werent drunk

 

[SAG3 5,000+ posts]

they werent drunk

you werent there.