Sold Savard Bandpass

[BassApocalypse 10+ year member]

http://www.caraudio.com/forum/showthread.php?t=166292

http://www.caraudio.com/forum/showthread.php?t=166292

http://www.caraudio.com/forum/showthread.php?t=166292

*!*!*!*!*!* Attention! Read Above Articles *!*!*!*!*!*

I have an old school Savard Bandpass box for sale. It's not in the greatest condition, but could possibly be an easy fix. Deminsions (SP) are 27.25In. (width) X 14.25In. (length) X 17In. (depth). Port deminsions (SP) are 2In. (width) X 13.125In. (height) X 6In. (depth). Port Volume is 157.5 Cubic Inches. Port is located 8.25In. BEHIND subwoofer. Subwoofer cut out is 11In. Sealed part is 8In. (length) X 15.5In (depth) X 13In (width)(Internal). Sealed Volume is .93 Cubic Feet. Ported deminsions are 17.5In. (length) X 15.5In. (depth) X 13In. (width)(Internal). Ported Volume is 2.01 Cubic Feet. Plexi-glass is 1/4In. thick. Box has 2 terminals, so it would easily be able to wire a dual voice-coil sub, to either Ohm operations you want, without having to take out the sub. Or, you can have a neon light with a single voice-coil sub. I'm wanting atleast $25 for the box (Shipping NOT included) I'm located in Galena Missouri (Zip 65656). Box weighs about 25-35lbs. You may IM me for more information on Yahoo! Messenger at Must_Be_High_To_Function.

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015496.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015495.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015488.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015487.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015485.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015484.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/S3015483.jpg

Thank you for taking the time to look at my listing. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Take care, Jeremiah.

Click to read more...

 

[mazdakid 5,000+ posts]

do you know tuning info?

 

[BassApocalypse 10+ year member]

do you know tuning info?

Well, I'm not TOO sure, but I used BassBox Pro 6, and with a Volcano Loudspeaker 12CDS (Almost what I had in it.) it was 28.7Hz, so I'm guessin' it's 28-30Hz depending on sub.

 

[BassApocalypse 10+ year member]

Bump.

 

[BassApocalypse 10+ year member]

I also have a Kenwood KDC-4019 and a Pioneer reciever. Kenwood has NO face plate, and I'm not completely sure if the Pioneer receiver works or not. $20+shipping for both units, or 5+shipping for the Pioneer, and 15+shipping for the Kenwood. OBO.

 

[BassApocalypse 10+ year member]

Bump and Pictures of the Kenwood KDC-4019 Reciever.

http://i55.photobucket.com/albums/g149/JeremiahChristopher/Kenwood/S3010009.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/Kenwood/S3010012.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/Kenwood/S3010010.jpg

http://i55.photobucket.com/albums/g149/JeremiahChristopher/Kenwood/S3010001.jpg

Sorry about the following picture, my camera isn't too good, but you can SORT OF make out that it IS infact a Kenwood receiver.

http://i55.photobucket.com/albums/g149/JeremiahChristopher/Kenwood/Kenwood.jpg

 

[BassApocalypse 10+ year member]

I also have a Splash Neon Series amp for sale, if anyone is interested. Splash Neon-302 2 Ohm Stable. 300w Max. I had it hooked up to 2 12" Pioneer subs, and it pushed them with ease, I also had it hooked up to 2 6x9's that were rated at 150wrms and blew them.

 

[jellyfish420 10+ year member]

do you know what sub this box was designed for? correct me if i'm wrong...but aren't bandpass boxes supposed to be designed around the t/s parameters, for the best sound out of a particular sub? and it says easy fix, whats wrong w/ it? just the paint?

 

[BassApocalypse 10+ year member]

do you know what sub this box was designed for? correct me if i'm wrong...but aren't bandpass boxes supposed to be designed around the t/s parameters, for the best sound out of a particular sub? and it says easy fix, whats wrong w/ it? just the paint?

This box I got used from a friend, and had the intentions of fixing it and putting it in my Jeep, never got around to it, and now I have a sealed box for my Jeep. I'm NOT sure what this was designed for, but I do have the sub that was in it, when I got it. The sub was an OLD Volcano Loudspeaker. The box needs to be sealed properly and of course the paint, it also needs to be braced back together, the wood is pulling apart (Not very much), and the plexi-glass also should get replaced.

 

[snoopdan 5,000+ posts]

This box I got used from a friend, and had the intentions of fixing it and putting it in my Jeep, never got around to it, and now I have a sealed box for my Jeep. I'm NOT sure what this was designed for, but I do have the sub that was in it, when I got it. The sub was an OLD Volcano Loudspeaker. The box needs to be sealed properly and of course the paint, it also needs to be braced back together, the wood is pulling apart (Not very much), and the plexi-glass also should get replaced.

There was two versions of this box, the 10" and 12" version, which had a Savard Rap driver in it. Circa production date was 1992 and these were quite loud with the savard sub in it for back in this time period of car audio.

I had one, which is why I know so much //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Id love to have this box for nostalgic reasons, but thanks for the pics on it!

 

[SilverSquared 10+ year member]

Savard was hand made here in Louisiana. They were out of Baton Rouge. The model lines were, from bottom of the line to top, Rap, Professional, and Hi-Q. I have a Rap 15 here in PERFECT condition that I prolly will NEVER install it again. I had 2-12 raps in my 1st car in a band pass and WTF were they loud. VERY nice.

 

[Bipolar 10+ year member]

Do you still have the Savard box?