bball09124 10+ year member
CarAudio.com Veteran
Can some good box builders link me to a good circular saw blade and the top 3 roundover bits I need? The cheaper the better preferably. 1/2" shank on the router too btw.
In that thread, the 3/4" roundover bit that was linked is $45??? Does it really cost that much for a decent one or can I get away with a cheap one?This is for the router bits. I posted a question like this in the past and it should be made a Sticky http://www.caraudio.com/forum/showthread.php?t=373935&highlight=router+bits I just got 1 inch flush bit today. Can not wait to try it. Also got a 1 inch Up spiral last week thing is awesome.
i've got a cheap ryobi, and i regret it. it chips the wood on the corners sometimes. i only use oldham saw blades.In that thread, the 3/4" roundover bit that was linked is $45??? Does it really cost that much for a decent one or can I get away with a cheap one?
Actually when it comes to blade and bits, in general the cheaper the worse. //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gifCan some good box builders link me to a good circular saw blade and the top 3 roundover bits I need? The cheaper the better preferably. 1/2" shank on the router too btw.
You can get bits a lot cheaper. But speaking from personal experience , I wouldn't. Spend a little extra now and save yourself the hassle of dealing with dull bits that don't last for ****.In that thread, the 3/4" roundover bit that was linked is $45??? Does it really cost that much for a decent one or can I get away with a cheap one?