Right pacakge for sundown sae-1000d??

[zx12 10+ year member]

http://cgi.ebay.com/NEW-2007-KICKER-PK4-4-GAUGE-AMPLIFIER-POWER-KIT_W0QQitemZ250146430742QQihZ015QQcategoryZ71528QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Is that a good kit to get power to my amp? i will only be using 900 rms to two 10 inch BMS. What else do i need?

Click to read more...

 

[alxmlr789 10+ year member]

although 4 gauge COULD cut it, i would recomend using 1awg for anything over 1kw.

 

[kross 10+ year member]

4 Gauge doesn't leave you much headroom if you want to expand your system later. It sucks to have to rerun the power cable. Just oversize it the first time, and you won't have to worry about it again.

And by 1 Gauge, I think alxmlr789 was referring to 1/0 gauge, which is different than 1 gauge.

 

[zx12 10+ year member]

4 Gauge doesn't leave you much headroom if you want to expand your system later. It sucks to have to rerun the power cable. Just oversize it the first time, and you won't have to worry about it again.
And by 1 Gauge, I think alxmlr789 was referring to 1/0 gauge, which is different than 1 gauge.

I understand i am at the limit... but i am not going to expand at all and dont want to pay for the bigger wire. Besides up sizing, what else do i need besides this kit.

 

[alxmlr789 10+ year member]

edit: yes 1/0 gauge.

I understand i am at the limit... but i am not going to expand at all and dont want to pay for the bigger wire. Besides up sizing, what else do i need besides this kit.

Thats what i thought too when i fits got into car audio. It was a pain in the *** to change the power wire out.

I had 1500w runnin on a 4ga wire at one point.. it melted the wire up by the fuse box. Last time i made that mistake.

 

[kross 10+ year member]

Well, the amp kit you linked on eBay doesn't include RCA interconnects, remote turn on lead, speaker wire, ring terminals, or split loom. And they want almost $20 shipping!

Check out the kits at http://www.knukonceptz.com/productMaster.cfm?Category=Amp%20Installation%20Kits