Hello everyone...
I am currently upgrading to an Avalanche 15 for my system. This means that I will need a new box to put it in with lower tuning, and I also have an extra sub to sell.
Resonant Engineering SE 15
The sub has no electrical problems at all. I have only "smelled" this woofer once, and that was the smell of excess glue burning off when I first got it. The sub does have a few physical imperfections. On the top half of the sub there is a small line of where the surround rubbed against the back of my trunk due to me not mounting it stupidly. The surround basically has a really minute line of rough surround. At the top left of the surround, there is a quarter-sized area of the same rough surround. On the cone there is a few minute scratches from where someone decided to touch my woofer while it was in full swing. No idea why. However, none of this has an effect on it's performance.
--- Asking price: $140 + shipping.
Subwoofer Enclosure
This box is built with 3/4 inch MDF. I haven't measured in a while so I'm gonna be real close with dimensions. The external dimensions are 36"wide, 16.5" tall, and 18" deep. The port is 15x2 and 14" long, and the internal net area is 4.3 cubes. The box is tuned to 30hz. It has been carpeted, and there is a custom logo on the top. The logo was done by using MSPaint to make a logo, printed it out on thin cardboard, cut out a stencil, taping it to the box, using white spraypaint, using glue to harden the spraypaint, then another layer of spraypaint.
--- Asking price: $15.
If you want to buy the SE 15, I will have an Avalanche 15 shipping crate to ship it in. Shipping weight will be about 35 pounds, and I'll ship any method. I ship from zip code 43123.
I know that these items are a bitch to ship, so if you would like to come to the Cincinnati, Ohio meeting i will be happy to bring either item down for ya.
I accept paypal or check or anything you wanna send.
References are Kali77, and i am on Ebay as gcadidas13.
Thanks for reading!
Brian
I am currently upgrading to an Avalanche 15 for my system. This means that I will need a new box to put it in with lower tuning, and I also have an extra sub to sell.
Resonant Engineering SE 15
The sub has no electrical problems at all. I have only "smelled" this woofer once, and that was the smell of excess glue burning off when I first got it. The sub does have a few physical imperfections. On the top half of the sub there is a small line of where the surround rubbed against the back of my trunk due to me not mounting it stupidly. The surround basically has a really minute line of rough surround. At the top left of the surround, there is a quarter-sized area of the same rough surround. On the cone there is a few minute scratches from where someone decided to touch my woofer while it was in full swing. No idea why. However, none of this has an effect on it's performance.
--- Asking price: $140 + shipping.
Subwoofer Enclosure
This box is built with 3/4 inch MDF. I haven't measured in a while so I'm gonna be real close with dimensions. The external dimensions are 36"wide, 16.5" tall, and 18" deep. The port is 15x2 and 14" long, and the internal net area is 4.3 cubes. The box is tuned to 30hz. It has been carpeted, and there is a custom logo on the top. The logo was done by using MSPaint to make a logo, printed it out on thin cardboard, cut out a stencil, taping it to the box, using white spraypaint, using glue to harden the spraypaint, then another layer of spraypaint.
--- Asking price: $15.
If you want to buy the SE 15, I will have an Avalanche 15 shipping crate to ship it in. Shipping weight will be about 35 pounds, and I'll ship any method. I ship from zip code 43123.
I know that these items are a bitch to ship, so if you would like to come to the Cincinnati, Ohio meeting i will be happy to bring either item down for ya.
I accept paypal or check or anything you wanna send.
References are Kali77, and i am on Ebay as gcadidas13.
Thanks for reading!
Brian
