Ericjl
Junior Member
I just bought a JVC head unit to install in my 1994 Mazda 626. However, i haven't been able to remove the stock reciever/tape deck. I seems like its bolted to something at the back, and I can't get it out. Somebody help!!!
-
2Participant count
-
Participant list
MikeofTulsa Moderator
The one and Only!
alot of radio's have this little metal brace that is bolted to the car and the rear of the h/u....its a good anti theft device....i once spent 3 hours trying to get a h/u out of my wife's care before i realized that was why it wouldnt come out....usually they use an allen head screew to hold them in place....good luck
Activity
No one is currently typing a reply...
Similar threads
Yep, that will mark the third iteration of teh X series. i figured that was in the loop as they have been running out of stock on the last...
- Started by MavRush
- General Car Audio
That is the perfect spot to do that. OEM sub may interfere with the new one and cause cancellation.
- Started by boscher50
- Amplifiers
Those NVX are very good indeed. I only have a leftover set because they were originally going into my brothers restomod 68 Chevelle SS and we...
- Started by dannieboiz
- General Car Audio
Could not tell you, but you may want to start by going to crutchfield and get a consensus on the 7 or so replacements they recommend. That average...
- Started by S550 GT
- Subwoofers
As for a coned speakers (woof, midbass, mid) driver polarity, a common household D cell battery works great. Connect the batter to wires, touch...
- Started by Kickstand
- Wiring, Electrical & Installation
About this thread
Latest topics
-
-
-
BOSS560RBG How to connect a sub, powered or otherwise.- Started by Carlos_510
- Replies: 3
-
-