Remote wire to Battery?

No, run the remote wire to the remote out on the back of the headunit. You can then install a switch on the remote wire to turn it on or off, but if you run it directly to the battery you will have problems because the amps will always be on, and you will kill your battery.

 
connect your remote wire to the blue wire with white stripe coming from your deck.....somewhere in line add a $3.00 toggle switch...get the one without the blingy lights so only two connections...tie it in line with your remote wire...one side to deck the other to amp...then you can switch the amp on and off FTW //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
connect your remote wire to the blue wire with white stripe coming from your deck.....somewhere in line add a $3.00 toggle switch...get the one without the blingy lights so only two connections...tie it in line with your remote wire...one side to deck the other to amp...then you can switch the amp on and off FTW //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
and then go get a loan and not pay it back

 
The car is an Impala, and theres no remote wire on the stock radio so i dont know what to wire the remote wire to.
you can wire it to an ignition controlled accessory spot that is currently not being used in your fuse box......you should probably fuse it tho

 
No, run the remote wire to the remote out on the back of the headunit. You can then install a switch on the remote wire to turn it on or off, but if you run it directly to the battery you will have problems because the amps will always be on, and you will kill your battery.
WINRAR.

nG

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

yeah, it'll be hot but off. Just like your tv when it's plugged in.
3
1K
Remote turn on. Going to check it later this week. Almost 100% certain it's something with the amp. I am assuming that a resistor inside went bad...
9
2K
With the amplifier fused it will be fine for testing an amplifier to see if there is an issue with the remote wiring coming from the HU, or great...
4
1K
As stated..A jumper wire from remote to Power on amplifier will be a nice little test to see if the amplifier is working. If it does, I would...
3
1K

About this thread

muskymatt913

10+ year member
Member
Thread starter
muskymatt913
Joined
Location
chicago
Start date
Participants
Who Replied
Replies
19
Views
16,462
Last reply date
Last reply from
ntech14
Screenshot_20240518-030709~2.png

1aespinoza

    May 18, 2024
  • 0
  • 0
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top