recomend some 8s or 10s for SQ (sql maybe?)

[LowLinc 10+ year member]

i would like to get some 8s or 10s for sq. want it to be very clean sounding but still get decently loud. i dont want to break the back doing it either, maybe 300$ total for the subs. i have a us-amps 50HC to push them (375 rms at 1 ohm(underrated)). front stage is boston pro 6.5s off a us-amps us-100(probally need a bigger amp) equalization is a PG eq215ix.

i have been looking at the JLWO, ID8-V3, and some dayton audio stuff. i have gone thru the last 15 pages and done some searches etc and those seem best suited for what i want to do. i would like to get a combo of 2-10s or 4 8s to get a total load of 1 ohm to take advantage of this amp.

please make some sugestions and give me some feedback on these subs.

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=295-550

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=295-545

Click to read more...

 

[LowLinc 10+ year member]

i guess nobody knows/cares?

any kind of sugestions at all?

 

[Spr0ket 10+ year member]

For 8s, you should check out the Great 8 Challenge. Fantastic review of 8" subs. For 10s, if you want the most cone area, you should go four 8s rather than two 10s. Dayton subs are decent, but not fantastic. Keep that in mind.

 

[fuzzai 10+ year member]

Why not look into JL's w3's?

http://mobile.jlaudio.com/products_subs.php?series_id=19

There nice 8"s. get 4 of them and im sure you'll be pleased with the SQ.

If you go wiht 4 Dual 2ohm subs, you can wire them to 1ohm.

 

[OlogyAudio 10+ year member]

http://www.madisound.com/cgi-bin/index.cgi?cart_id=8864495.29414&pid=1581

I started a group buy on those since I have a dealer's account with them //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif -- only need a few more to lower the price to 49.23/ea -- VERY nice sub/midwoofers //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Will be flat if installed IB down to 20hz... or will do fine sealed/ported...

If someone was leaning more towards SQL ported would be better... or IB -- highpassed at ~30hz to limit excursion at higher sound pressure...