RE SX or Incriminator Audio lethal injection?

[ajspellm 10+ year member]

i am debating between these subs. i found a used 12" incriminator audio lethal injection for $170 shipped. but i was thinking about saving my money and buying an 10" sx. which one is the better sub?

Click to read more...

 

[flakko 5,000+ posts]

if your into hardcore loudness, i would just get the sx... the LI's are the best SQL sub for the money.

 

[Raven 10+ year member]

X2 - I also happen to think highly of the SQ of the LI.

 

[PhatTonyDeMarco 5,000+ posts]

Are you looking for more output or better SQ?

I would take the IA, should take the SX in output if you do it right...

 

[ajspellm 10+ year member]

i want it to get loud and sound good. they will be run off of a kicker kx1200.1. i also dont have much room in my trunk. i have a mustang so i dont know how big of a box i cant fit in their. what type of box would you recommend for these subs? what should i tune the box to and how big should it be?

thanks

 

[flakko 5,000+ posts]

for the LI i would go 2-2.75 (had mine in 2.75) with around 700w. you can run 800 daily ported and 2kw on burps lol

 

[Raven 10+ year member]

I have mine in 3 cubes @ 32hz and 800 watts. Sadly the ~30 square inches of port is choking it off. =\

 

[ajspellm 10+ year member]

for the LI i would go 2-2.75 (had mine in 2.75) with around 700w. you can run 800 daily ported and 2kw on burps lol

what was the box tuned to? if i run 600 watts to it will that be fine?i think that is what my amp does at 2 ohms

 

[InhumanAcura 5,000+ posts]

The sq out of both of them isnt very good imo. The LI has more potential up to ~900-1000 watts from what weve tested.

Comparing a sub with an rms of ~5-600 to a sub with a 1000-1500rms isnt very fair tho.

pick the sub depending on the power you have.

 

[DFW40 10+ year member]

I have mine in 3 cubes @ 32hz and 800 watts. Sadly the ~30 square inches of port is choking it off. =\

30 inches of port area was not enough?

 

[ajspellm 10+ year member]

i think i am going to go with the lethal injection. what should i tune the port to on the box? i think i am going to go with a 2.0cuft ported box. the manufacturers site recommends 28-35hz. what should i make it?

 

[InhumanAcura 5,000+ posts]

30 inches of port area was not enough?

not for 3^3's

 

[ajspellm 10+ year member]

does it matter if the inside of the magnet has rust on it like this one? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5861139173&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

 

[Polecat 5,000+ posts]

I wouldn't...

 

[SAG3 5,000+ posts]

I wouldn't...

put it in?