RE MT18 after a 40kw rms burp...

[NDMstang65 10+ year member]

Nick the origional poster said something that he didnt use the van? Quad MT or just a dual?

I'd figure he used the 220 or 440v plug //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

That's about the only way that you can sustain a true 40kw...

To a given load with 2 coils...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[NDMstang65 10+ year member]

//content.invisioncic.com/y282845/emoticons/bsflag.gif.21f42eccd34b7d1eb1608fb1b59b69c3.gif

AAAAAAAAnd for the original poster who is full of bs:

NDMstang65v2: question

NDMstang65v2: was there a kid that brought a mt 18 over to your shop?

Mike Bartells: nope

NDMstang65v2: have you ever hooked an mt 18 to anything such as a AC plug or a crown freeair?

Mike Bartells: I've never had an RE, ever

NDMstang65v2: Thanks man, das all i need.

You sir are full of of it...plum up to your eyes.

 

[Feandil 10+ year member]

You sir do not know these batteries very well.
Hate to break it to you but with those 10 batteries there is no voltage drop (only .2 volt)

That's 6800 watts PER amplifier.

Don't doubt me, you did last time and it got yourself a busted lip.

last time?

the time that you thought a parthenon was 130db/w with a mms around 2800g???

and then I showed you that's impossible?

anyway... 10 batts yea you'll have a voltage drop with 5000amp draw per sec

and yes I've used stinger batts

they have a nice 10,000amp reserve there... but you can't pull all that out for a 2 sec burp even if you had the wiring etc to sustain it

don't get your e-wang up about this... just pointing out that firstly those amps couldn't do over 27kw... and 2ndly the electrical system couldn't support it

you can take it from there

 

[Feandil 10+ year member]

I'd figure he used the 220 or 440v plug //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

you'd need almost a 100amp line with 440v to sustain that

99% of 220v is only 6kw.... and 440v is generally around 14kw max

 

[NDMstang65 10+ year member]

last time?
the time that you thought a parthenon was 130db/w with a mms around 2800g???

and then I showed you that's impossible?

anyway... 10 batts yea you'll have a voltage drop with 5000amp draw per sec

and yes I've used stinger batts

they have a nice 10,000amp reserve there... but you can't pull all that out for a 2 sec burp even if you had the wiring etc to sustain it

don't get your e-wang up about this... just pointing out that firstly those amps couldn't do over 27kw... and 2ndly the electrical system couldn't support it

you can take it from there

no no no no no

see this is where your wrong - i didnt say a parthenon

i never said what it was

i said it had been made - and you still don't have a clue in the world as to what that is, but that's a different story and a different argument. (your narrowmindedness still makes me laugh to this day)

You showed your true self over on Sin. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif - Get your ego down off of its high horse, it's already been slapped once. I'm sure it'l happen again.

Just a fyi (since you do seem to know all about everything and everybody) - Mike does not use stinger batteries.

They are Eagle Picher - Horizon batteries http://www.ephorizon.com/Horizon/Products/Batteries/

And they were actually engineered and developed originally for use sattelites in space to last for 7 years...

You ever ran a crown off of a single battery for 8 hours before its completely dead? (full tilt may i add)

Didn't think so.

Reality Check - If you ever want to be successful in this industry and develop half of the products you have ever thought of and dreampt up you better stop hitting your resources square in the mouth in public places and public forums. If you can't get ahold of any parts and are hot headed about everything that you speak on your going to get nowhere in this industry and you will be lucky to have anybody to use any of your products that you have dreampt up. The past has a bad way of of coming back to haunt you. Don't market stuff and talk it up before you even have a prototype.

I'm done with you, from here on out you leave me to my business that i'm attending to and ill leave you to your business that your attending to.

Your actions over the past 2 weeks speak for themselves.

/thread.

 

[ss3079 5,000+ posts]

This is going nowhere fast.

And it's easier to lock it then to try and get it back on topic ...