RCA's

  • 2
    Participant count
  • Participant list
OK if I'm running two four channel amps and 1 mono and I already have 1 set of 16ft 4-channel RCA's and two 16ft 2 channel RCA's, how many do I need if I'm running a DSP (PPI 88r) with 2 in 8 out?
You need one more channel unless you will bridge at least one pair of full range amplifier channels. How many speakers are you running?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No make or model number on it? Do you have an exact picture of the rear and all its glory?
8
876
Use two sets of RCAs. One set for the Front channels and the other for Sub Output and into Rear Input on the amp. Turn off the Rear Filter on the...
5
912
Thanks a ton for your suggestion to my rather long query, I ll follow it and see how it works out. Thanks again
2
763
He'll be fine with any 4 ohm speakers, tuned properly. The focals are rated for 100 watts nominal and with the passive crossovers and power to...
6
856
Try this other test; get a 3.5mm headphone repair cable and connect it to the LC7i input. Connect that to your phone and measure. This will tell...
11
945

About this thread

dailyrider123

Senior VIP Member
Thread starter
dailyrider123
Joined
Location
under the sun
Start date
Participants
Who Replied
Replies
2
Views
528
Last reply date
Last reply from
dailyrider123
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top