quick question

[Dj-torn 10+ year member]

Would i be able to hook up 6 SVC subs, 60W RMS each, 4 ohhms each in this manner, since the amp is 3 mode capable?; If so what would be the RMS on each speaker?

Left Channel 2 subs @ 2 ohms -

|- 2 Subs @ 2ohms

Right Channel 2 subs @ 2 ohms -

PA GOTHIC OV2-500

Specs:

2-Channel Amp Specifications

Amplifier Type: 2-channel

RMS Power @ 4 Ohms: 125W x 2

THD at 4-Ohm RMS Power: 0.02%

Bridged RMS Power @ 4 Ohms: 300W x 1

Speaker Level Inputs: Yes

Preamp Outputs: Yes

Built-In Crossovers: HP/LP

Bass Boost: 18 dB

Frequency Response: 10-30,000 Hz

Signal to Noise Ratio: 97 dB

Fuse Rating: n/a

Click to read more...

 

[johnecon2001 5,000+ posts]

wire three subs in parallell, and then the other three in parallell. then wire them all together at the amp in series. this will give you roughly a 3 ohm load (2.96). the amp should be fine with that after impedence rise and all.