GPoodle 10+ year member
Junior Member
Hey all, I've got a quick question on an alarm install I'm conducting.
First off, I have a 1993 Civic, with power locks.
The connector comming from my alarm has three wires, red, blue, green.
Green = Unlock
Red = 12V Out
Blue = Lock
On the wiring diagram I have, the Power Unlock wire is Green/Red, and the Power Lock wire Green/White.
My question is, what do I hook the Red 12V out wire to? In the wiring diagram for this car, theres also a "Door Trigger" wire, is that what I should hook it to?
Also, it says the Power lock/unlock wires are "in drivers door at door lock module", do I have to take the door panel off? because I found the Grn/Red and Grn/Wht in the nest of wires under the dash.
Thanks! This is my first alarm install, but I've got the alarm to work, but just cant figure out the door locks.
//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
First off, I have a 1993 Civic, with power locks.
The connector comming from my alarm has three wires, red, blue, green.
Green = Unlock
Red = 12V Out
Blue = Lock
On the wiring diagram I have, the Power Unlock wire is Green/Red, and the Power Lock wire Green/White.
My question is, what do I hook the Red 12V out wire to? In the wiring diagram for this car, theres also a "Door Trigger" wire, is that what I should hook it to?
Also, it says the Power lock/unlock wires are "in drivers door at door lock module", do I have to take the door panel off? because I found the Grn/Red and Grn/Wht in the nest of wires under the dash.
Thanks! This is my first alarm install, but I've got the alarm to work, but just cant figure out the door locks.
//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif