Quick distro block help....

[Down 10+ year member]

This is what I'm looking for. I need a distro block with 1 1/0 in, and 2 1/0 out, I dont care what type of fuse it takes, has to be at least 100a. It has to have a volt read out, and of course I want it to look nice because its going on a nice amp rack. I also want a matching ground distro block, I'm looking at Tsunami and all these other brands, ebay, ect. Can anyone offer me some help?

-Down

Click to read more...

 

[punch 10+ year member]

sounds like a bad idea to me... if you split the o gauge into 2 you probably should go to 4 gauge wire...

also what I would do:

buy a O AWG " T " , stinger sells them, then fuse the seperate lines to the amps...and of course the main line.

 

[Down 10+ year member]

The power distro block has to have 2 1/0g outputs because I'm using 2 amplifiers that has 1/0g inputs, so I'm trying to do this right the first time. Instead of fusing them at the lines to the amps, I want a digital distro block along with a matching ground block......

-Down

 

[ReDemoN 10+ year member]

I bought this

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=004&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=140145648311&rd=1

 

[Andrew12 10+ year member]

^^^

I used that same one in an install w/ 2 sundown 1500's... the outputs can take 1/0 or 4 gauge... Pretty cool distro

 

[punch 10+ year member]

The power distro block has to have 2 1/0g outputs because I'm using 2 amplifiers that has 1/0g inputs, so I'm trying to do this right the first time. Instead of fusing them at the lines to the amps, I want a digital distro block along with a matching ground block......

-Down

understood... forgive my newbieness...

 

[azbass 5,000+ posts]

This is what I'm looking for. I need a distro block with 1 1/0 in, and 2 1/0 out, I dont care what type of fuse it takes, has to be at least 100a. It has to have a volt read out, and of course I want it to look nice because its going on a nice amp rack. I also want a matching ground distro block, I'm looking at Tsunami and all these other brands, ebay, ect. Can anyone offer me some help?

-Down

probably be better to have 2 runs of 0 guage to your amps.

 

[spoonraker 10+ year member]

A distribution block, distributes power, it doesn't create it. You can't magically split a wire into two wires of the same gauge and expect them to both have the power of the original wire.