question

[M Dot Holla 10+ year member]

instead of buying an amp that can push more watts, can i buy another hifonics tx1005d for my system so I have 2 running to 2 subs, each sub has its own amplifier. Are these amps strappable or whatever or would this not work? I dont wanna have to run all different power/ground/turn on cables and wires for the 2nd amp.

Mike

Click to read more...

 

[wesl56 10+ year member]

you still gotta run more power wire...

 

[M Dot Holla 10+ year member]

if you mean double everything then screw it

 

[wesl56 10+ year member]

well depends on what you've got run back there now? i assume 4ga? if so you will just need to run another 4ga for the new amp and a ground... you can use the same remote and rca's

or if you just want a single run of cable thru the car you can run something thick like 0ga and split it into two 4ga in the rear where the amps are

either way, you can use the existing remote/rcas for it... just gotta supply it with the juice

 

[M Dot Holla 10+ year member]

yeah i got 4 ga. How would I use the same RCAs and turn on...?

 

[wesl56 10+ year member]

use Y adapters to split the RCA's signal to both amps.... something like these:

http://www.knukonceptz.com/productDetail.cfm?prodID=KLA-1F2M

i dunno about your amp, but look on it and see if it has rca "outputs"... if so you can just use another short rca cable to go from those outputs to the inputs on the other... if it doesnt have em you gotta use Y adapters

and for the turn on just cut a piece of wire and put it from the remote turn on from one amp to the other

 

[M Dot Holla 10+ year member]

Would I need to upgrade my battery at all?

 

[wesl56 10+ year member]

most likely no... if its in good condition... would be a good idea to do the big 3 tho