Question on which amp or both

[Minkos6]

I have two sets of BA pro 50 se components. I also have to four channel amps an alpine pdx 4.100 and a jl audio v2 slash 300x4. Should I use both amps or just one. What are advantages versus disadvantages. Any help wold be greatly appreciated. Thanks

Click to read more...

 

[Side Show 10+ year member]

i'd run them off the one amp to start with, if you find they arnt loud enough or you want to send them more power, then install the second amp

 

[Minkos6]

I'm already running off the alpine, which is seeing a 3 ohm load per channel, with db okur a71001.1 which was used for a jl stealthbox that I changed the sub in it to a dvc infinity and also a jl audio 10 tw3. I am replacing the stealth box with a custom made center console with a w7 inside, and switching the db okur a1100.1 to a Rockford T1000. The vehicle is an 08 Sierra extended cab. One set of components in front door other in rear. I know I can bi/amp the components, but will I loose spl and gain sql with the addition of the second component amp. Any advice on which way to go would be appreciated. Thanks