Quad 1ohm

[bones22 5,000+ posts]

any way i can get a 2ohm load on my amp?

i know .25, 1, and 4 ohm. my amps strapped together do 5000@2ohms

could i unstrap them and run each amp at a 1ohm to the sub

Click to read more...

 

[Immacomputer 10+ year member]

Neither one of those options work for you. Your best bet is to try them strapped at 1 ohm and back off on the gain to keep current draw and output down. They may not like this, depending on the amps though.

If you only use two coils per amp, your options are .5 and 2 ohms.

 

[bones22 5,000+ posts]

im using 2 cadence zrs10s. not sure if they will do 1ohm strapped.

if i math the gains on the amps wouldnt i be able to run each at 1 ohm to the sub? so 2 amps running at 1ohm each to the same sub

 

[Immacomputer 10+ year member]

No. That is not possible as I already said.

 

[btlking 10+ year member]

if you run 2 coils to 1 amp you get .5 or 2 you cant get one

 

[joetama 5,000+ posts]

Try them strapped at 1 ohm....

If you don't have the ability, new speaker or amp...

What sub is this on anyway?

 

[bones22 5,000+ posts]

ground zero plutonium 18

 

[Hintzyboy 5,000+ posts]

New sub will be the easiest fix.

 

[joetama 5,000+ posts]

That has a paper cone right?

And I agree with the different sub...