Damaso87
10+ year member
iPoor
*title correction. the liquid deadener is actually SS's Spectrum Sludge, not eDead
After ordering my Memphis Belle 16MCH-1300, Rainbow Germanium mids and x-overs, and Polk M-Class tweets, i finally decided to get the ball rolling on the fabrication and installation. Whew!
Prior to beginning this project, i had made a little custom dash kit for my Pioneer P860MP so that i would be able to close the CD compartment over the H/U when not in use.
Here is a picture of the H/U in the stock pocket after gutting out the locking lever mechanisms.
And here it is in my dash. **** it was a pain to get in due to the flap that was STILL on and functional. WoO!
Work began on 8/26/07.
Here is the driver side pod at its roots. The area is taped off and protected from the resin drips.
First layer of glass down! You can barely see it cause i soaked it down with resin.
Day 2
Heres the pods with cloth stretched over and a couple layers of glass on the top.
And here they are, finished! One is loaded with the germ.
Fin.
After ordering my Memphis Belle 16MCH-1300, Rainbow Germanium mids and x-overs, and Polk M-Class tweets, i finally decided to get the ball rolling on the fabrication and installation. Whew!
Prior to beginning this project, i had made a little custom dash kit for my Pioneer P860MP so that i would be able to close the CD compartment over the H/U when not in use.
Here is a picture of the H/U in the stock pocket after gutting out the locking lever mechanisms.
And here it is in my dash. **** it was a pain to get in due to the flap that was STILL on and functional. WoO!
Work began on 8/26/07.
Here is the driver side pod at its roots. The area is taped off and protected from the resin drips.
First layer of glass down! You can barely see it cause i soaked it down with resin.
Day 2
Heres the pods with cloth stretched over and a couple layers of glass on the top.
And here they are, finished! One is loaded with the germ.
Fin.