bigbass032 10+ year member
Member
Well, I decided a few days back to start this lil project. The frame was a gokart I had awhile back, bought from walmart, with a 6hp murray //content.invisioncic.com/y282845/emoticons/help.gif.cee8f684da1ba626487a8bc51152e1ec.gif
I first off, took the old murray engine off and put a briggs 16hp vtwin on it. Turns out 16 hp is hard to get to the wheels (torque converters weren't very affective.)
Now she is coming together //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
The Old Motor:
http://zoidberg.routesys.com/~ecsold/motor/DSC01671.JPG
The New Motor:
http://zoidberg.routesys.com/~ecsold/motor/DSC01672.JPG
The motor came from an Yamaha R1 (1000cc)
Plz be aware this is a VERY temp setup (below) as I put it together just to get an idea of what needed to be placed where. I had the main mounting locations 100% welded but turns out its a tad to small, so I cut the very top and temp welded a small tube to hold it apart. The motor is sitting on 1 bolt of about 4 to hold it up (just for fun.) Tomorrow I will finish the motor mounts.
PICTURES:
http://zoidberg.routesys.com/~ecsold/gogo/DSC01708.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01709.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01710.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01711.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01712.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01713.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01714.JPG
Metal is 2x2" 1/8" wall
I first off, took the old murray engine off and put a briggs 16hp vtwin on it. Turns out 16 hp is hard to get to the wheels (torque converters weren't very affective.)
Now she is coming together //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
The Old Motor:
http://zoidberg.routesys.com/~ecsold/motor/DSC01671.JPG
The New Motor:
http://zoidberg.routesys.com/~ecsold/motor/DSC01672.JPG
The motor came from an Yamaha R1 (1000cc)
Plz be aware this is a VERY temp setup (below) as I put it together just to get an idea of what needed to be placed where. I had the main mounting locations 100% welded but turns out its a tad to small, so I cut the very top and temp welded a small tube to hold it apart. The motor is sitting on 1 bolt of about 4 to hold it up (just for fun.) Tomorrow I will finish the motor mounts.
PICTURES:
http://zoidberg.routesys.com/~ecsold/gogo/DSC01708.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01709.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01710.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01711.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01712.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01713.JPG
http://zoidberg.routesys.com/~ecsold/gogo/DSC01714.JPG
Metal is 2x2" 1/8" wall