Project 150 db

[rx7vert 10+ year member]

your right, I do need to read closer.

your 144 was with a door cracked meca style though right?

 

[denim 5,000+ posts]

L7s because it has been many times before

 

[tommyk90 5,000+ posts]

your right, I do need to read closer.
your 144 was with a door cracked meca style though right?

That is correct.

But the 141 on the dash was with the doors closed. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[rx7vert 10+ year member]

nice... What model Re is it? I'm also going for the 150 goal.. Gonna make a swipe at it with 2 15s. still trying to decide which ones.

leaning towards the Lethal Injection 15's right now

also considering the planet audio FU series if I could get some more info on them....

 

[tommyk90 5,000+ posts]

nice... What model Re is it? I'm also going for the 150 goal.. Gonna make a swipe at it with 2 15s. still trying to decide which ones.
leaning towards the Lethal Injection 15's right now

also considering the planet audio FU series if I could get some more info on them....

seXXX (SE, with the coil and spider of an XXX)

 

[rx7vert 10+ year member]

oh.. I have heard of them, but never seen one....

 

[audioholic 5,000+ posts]

Im hoping to hit 150 (TL) with a pair of 15" XXX's. Wish me luck. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Nikuk 5,000+ posts]

L7s because it has been many times before

He's right. If you want proven potential (?) for loud setups... there you go. It "easy" to make those loud.

If you want a cool/special/unique setup... I voted 1 tumult. Go with an uber-huge enclosure to bring the efficiency up and pray the suspension holds up to the wattage, triple walled, resin the interior, support & reflective boards internally, 80ish sq in port (with some rifling to it), around 1kw-1.5kw (for budget reasons). Good luck.

It can be done, lots of folks at the finals in S, SS(no wall) hitting just into the 150's. Just spend alot of money on wood & resin & glue.

Regardless, any of these setups would be ****ed loud for street beatin

 

[LoudCrownVic 5,000+ posts]

He's right. If you want proven potential (?) for loud setups... there you go. It "easy" to make those loud.
If you want a cool/special/unique setup... I voted 1 tumult. Go with an uber-huge enclosure to bring the efficiency up and pray the suspension holds up to the wattage, triple walled, resin the interior, support & reflective boards internally, 80ish sq in port (with some rifling to it), around 1kw-1.5kw (for budget reasons). Good luck.

It can be done, lots of folks at the finals in S, SS(no wall) hitting just into the 150's. Just spend alot of money on wood & resin & glue.

Regardless, any of these setups would be ****ed loud for street beatin

Exactly what I was thinking!