Powering a JL 12W6V2

[Iosias 10+ year member]

Right now im running my JLw6V2 at 8 ohms on a Solid Audio F11D, Its receiving around 200rms.

I was wondering if it the JL could handle being run at at 2 ohms for 760rms abouts? From what ive ready its been usually mixed advice and opinion so far on whether it would be wise to.

Click to read more...

 

[ancorp 10+ year member]

If you send it a clean 760w RMS, should be fine, depending on the box.

 

[Iosias 10+ year member]

It's in a sealed box about 1.45 after displacement.

 

[ancorp 10+ year member]

Should be fine, mine get about that power (perhaps less with voltage drop) and they're in about 1.9-2 cubes, ported.

 

[winkychevelle 10+ year member]

ust keep the gain a little lower than max power though i would expect it to handle that power unless u listen to straight dubstep or rap with low low notes

 

[Iosias 10+ year member]

I do occasionally but more along the lines of rock and such.

 

[murph 10+ year member]

Depending on your enclosure I would say 500-600 watts is solid for it in the recommended size.

 

[Flex68 10+ year member]

600WRMS is their suggested max (warranty), but if you gain down and send it clean power it should take 750.

Especially if you have appreciable rise around the main freq's

 

[Iosias 10+ year member]

Hopefully it works right, im gonna change it up here in abit and hopefully it doesn't blow lol.