Port placement questions!

[Rc 415 10+ year member]

Well, I have the box all put together come to find out the 3" Ports I ordered are too big with the flanges (6.25") to all fit on one side of the box! So I would like to know if thew can be placed as shown in the pictures below:

I would also like to know if this will change anything as far as how the box sounds ect.

Click to read more...

 

[Flipx99 5,000+ posts]

pics don't work

 

[Rc 415 10+ year member]

**** Tinypic has been malfunctioning for the last couple days. Should be fixed in a moment.

 

[smd4life 5,000+ posts]

yes sir indeed

 

[Rc 415 10+ year member]

Omfg these **** image hosting places are shrinking the images to nothing!

 

[Rc 415 10+ year member]

U see the pics?

 

[Rc 415 10+ year member]

No opinions huh?

 

[Rc 415 10+ year member]

I know someone knows!

 

[Ingleside 10+ year member]

it doesnt look like you have a choice.

you could try to use two 4 " ports instead of three 3 inch ports.

you could try to get all three on the side opposite the driver. two up top and one slightly lower in the middle and cut a hole thats angled so the port clears the hump by the time it gets to the middle. you can get ceative with a wood file.

its kind of ghetto and more of a last resort deal but i doubt anyone will see it since its going under your rear seats.

 

[Rc 415 10+ year member]

I thought about having all 3 on 1 side, but each flare end is like 6.25" and that will make it too much even if istaggered the port in the middle.