Poor Man's Buss Bar

Here's a thread for you poor guys like me who don't really have the cash for expensive buss bar. Since I'm about to start competing in AS1, I had to take my battery out and I knew that I'd need buss bar for all my ring terminal connections. I wasn't too happy because I knew that buss bar would be expensive (to me). I was talking to Chad Riggs about my problem and he linked me to a thread where a DB Drag competitor was on a tight budget and need some buss bar. What the guy ended up doing was taking a trip to Home Depot and bought 3/4" copper tubing and flattened it out by either smashing it with a hammer or a vise. Then you can buy bolts and lock washers to make the connections. After all was done he measured the resistance and it came out to be .001 ohm. I decided to do the same thing with some 7/8" copper tubing:) Now it will be easy to swap out my rear battery (for daily) and only a single battery (for competition).
Before with rear bat

100_1047.jpg


Now with buss bar

100_1185.jpg


100_1184.jpg


Voltage with car off

100_1187.jpg
u know actual copper bars arent all that expensive.

http://store.electrical-insulators-and-copper-ground-bars.com/copper-barstock.html

thats where i bought my copper busbars for my batteries.

 
at the battery! not the buss bar you idiot!
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:

 
I think you should just do S1 then you could have kept your rear battery. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Plus I don't see your rear jumpseats or speaker covers which automatically bumps you into street. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
I think you should just do S1 then you could have kept your rear battery. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Plus I don't see your rear jumpseats or speaker covers which automatically bumps you into street. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif
I don't want to be in your class just yet, I want to be successful:) I'm going to put the covers back on and my truck didn't come with jump seats.

 
I don't want to be in your class just yet, I want to be successful:) I'm going to put the covers back on and my truck didn't come with jump seats.
Wow, no rear seats at all?

I may be changing classes, fyi. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Lakota

5,000+ posts
Doesn't Know $hit
Thread starter
Lakota
Joined
Location
Louisville, KY
Start date
Participants
Who Replied
Replies
49
Views
3,454
Last reply date
Last reply from
tommyk90
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top