Plastic divider on amp broke

  • 3
    Participant count
  • Participant list

THChief

Junior Member
So while hooking up amp tonight I broke the outside plastic divider on the positive terminal. Is it still ok to use amp? The wire is in no danger of touching the remote because the inside peice is still intact. It also is not close to the fuses without it on the outside. Thoughts?

 
So while hooking up amp tonight I broke the outside plastic divider on the positive terminal. Is it still ok to use amp? The wire is in no danger of touching the remote because the inside peice is still intact. It also is not close to the fuses without it on the outside. Thoughts?
picture of the problem?

 
You will be fine. Even if it the + touches the remote terminal, it wont hurt anything, the amp just wont shut off.

However, if it touches the ground terminal, or the metal frame of your car.. thats a different story.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

During my replacement of a factory sub I had my factory plastic enclosure just sitting in the back with my new sub just sitting in it loosely and...
0
1K
Subs play to the beat with gain low but if I turn it up my subs play loud unwanted never ending bass that is constant and wont stop until I turn...
0
18
Subs play to the beat with gain low but if I turn it up my subs play loud unwanted never ending bass that is constant and wont stop until I turn...
0
16
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
224

About this thread

THChief

Junior Member
Thread starter
THChief
Joined
Location
Terre Haute, IN
Start date
Participants
Who Replied
Replies
2
Views
654
Last reply date
Last reply from
KTMrida4life
Screenshot_20240609-212906.png

Blackout67

    Jun 9, 2024
  • 0
  • 0
Screenshot_20240609-212805.png

Blackout67

    Jun 9, 2024
  • 0
  • 0

New threads

Top