Pioneer

[R0ID_RAGE 10+ year member]

yes...not so much a quality system, but cheap...and sounded decent.

I've posted this before(like 4 months ago) and haven't figured it out yet.

Should a 22w x 4 (rms) HeadUnit **** up 50w RMS speakers? the HU volume goes up to 60, what would be the result of playing at that level--just for a short period(30 seconds)? would any damage be done to the speakers?

can someone find me better speakers...this is the HU

http://www.sonicelectronix.com/item_8567_Pioneer+Premier+DEH-P590iB.html

(pioneer premier 590ib...22x4 rms, 94dB impedence)

speakers were pioneer TS-A6881R 4-way

http://www.sonicelectronix.com/item_6379_Pioneer+TS-A6881R.html

is there ANY reason they would sound like shit now (other than wiring...they are wired correctly)

Click to read more...

 

[2002XLT 5,000+ posts]

you probably clipped them.

 

[R0ID_RAGE 10+ year member]

you probably clipped them.

what exactly would i be looking for (sound wise) to know for sure?

and how can I prevent this in the future? HU has no way of setting gains, I had the HPF on...

also, if I buy new door speakers(ford)...what would the difference between 5x7 and 6x8 be? I'm using them strictly for mids/highs, 2 12's in the back for bass

also, would it be worth getting bass blockers for them? or should it be fine with only the HPF on?

btw, they sound horrible now at low and high volume...

 

[R0ID_RAGE 10+ year member]

From the search button I see pioneer revs are very well endorsed by you all...

would these run fine off my HU? what would be the difference between 6x8 and 6.5 ?

also, what should I do about the rear speakers?

what about these in the back?

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=15347

ello?

 

[R0ID_RAGE 10+ year member]

seriously^^^

should the revs work fine with my DEH590ib HU amp?

and should I get the infinities for the back, or should I match and get pioneer?

 

[bdavies11 10+ year member]

You probably damaged the internal amp in the H/u. Even tho it says 22rms per channel u probably get about half of that to be honest. I doubt you'd blow ur speakers off headunit power.

If u have any other working speakers lyin around hook em up and see if they too sound like shit.

As far as preventing this from happening again.... Don't turn your H/u up to 60. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[R0ID_RAGE 10+ year member]

You probably damaged the internal amp in the H/u. Even tho it says 22rms per channel u probably get about half of that to be honest. I doubt you'd blow ur speakers off headunit power.If u have any other working speakers lyin around hook em up and see if they too sound like shit.

As far as preventing this from happening again.... Don't turn your H/u up to 60. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

how high can you turn your pioneer HU up before it starts clipping. I'm getting it around 30. Is that normal, It just isn't loud at 30...at all.

 

[R0ID_RAGE 10+ year member]

is there a way to check whether its my speakers or HU internal amp without having an extra set of speakers?

 

[2002XLT 5,000+ posts]

you can take your headunit to just about any car audio place and they will bench it and let you know.

 

[krisfnbz 10+ year member]

The Point is, when you are running any aftermarket speaker(or really any speaker rather), when powering with just the head unit you are not giving the speakers the power they want to see. Just by getting an amp you will improve your system like crazy...even if you dont want to listen to it at higher volumes.

Even some "cheap" alpines or pioneers, you will see a big diff in an amped signal.

 

[R0ID_RAGE 10+ year member]

The Point is, when you are running any aftermarket speaker(or really any speaker rather), when powering with just the head unit you are not giving the speakers the power they want to see. Just by getting an amp you will improve your system like crazy...even if you dont want to listen to it at higher volumes.
Even some "cheap" alpines or pioneers, you will see a big diff in an amped signal.

would it be worth it now? If I got one, should I get a 4channel...wondering if you think my HU amp is completely shot, or if it would be ok to run the back 2 speakers?

or do you think I need a new HU as well? everything else works fine, the subs are runnin smooth(except my trunk rattle is sickening)

 

[Pootie 10+ year member]

Just get an amp/

 

[ultimate157 5,000+ posts]

you probably clipped them.

Wouldn't hurt the speakers.

 

[R0ID_RAGE 10+ year member]

Wouldn't hurt the speakers.

anyone recommend an amp for teh shitty speakers?

2-channel or 4-channel?

preferably cheap

I do eventually want to throw some comps in there...not for another 4-5 months though.

 

[ultimate157 5,000+ posts]

Check out profile amps...

http://www.profilecaraudio.com/amplifiers.htm