I have a PG 300.2 and a 500.2 amp for sale with very little use and are very underrated amps.
PG 300.2 $75.00 plus actual shipping
PG500.2 $100.00 plus actual shipping
maxdog03@comcast.net
Tantrum 300.2
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . .30 x 2
Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . . .75 x 2
Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .150 x 2
Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .300 x 1
Recommended Fuse Size . . . . . . . . . . . . . .30A ATO style
Dimensions without Endcaps . . . . . .8.4L x 10.0W x 2.35H
Dimensions with Endcaps . . . . . . . .13.4L x 10.0W x 2.35H
Tantrum 500.2
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . .50 x 2
Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .125 x 2
Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .250 x 2
Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .500 x 1
Recommended Fuse Size . . . . . . . . . . .30A x 2 ATO style
Dimensions without Endcaps . . . . .11.75L x 10.0W x 2.35H
Dimensions with Endcaps . . . . . . .16.75L x 10.0W x 2.35H
Common Specifications
Frequency Response . . . . . . . . . . . .±1dB, 20Hz to 20kHz
Signal to Noise Ratio (A-weighted) . . . . . . . . . . . . .>100dB
Input Sensitivity . . . . . . . . . . . . . . . .100 millivolts to 4 volts
Crossover Frequency . . . . . . . . . . . . . . . . .40Hz to 800Hz
Crossover Slope . . . . . . . . . . . . . . . . . . .18dB per Octave
Bass Boost . . . . . . . . . . . . . . . . . . . . .0 to +18dB @ 45Hz
DC Input Voltage Range . . . . . . . . . . .10 volts to 15.5 volts
Typical Current Draw at Idle . . . . . . . . . . . . . . . . .
Minimum Bridged Load . . . . . . . . . . . . . . . . . . . . . .2 ohms
Minimum Stereo Load . . . . . . . . . . . . . . . . . . . . . . .1 ohm
Maximum Power Load . . .4 ohms bridged or 2 ohms stereo
PG 300.2 $75.00 plus actual shipping
PG500.2 $100.00 plus actual shipping
maxdog03@comcast.net
Tantrum 300.2
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . .30 x 2
Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . . .75 x 2
Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .150 x 2
Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .300 x 1
Recommended Fuse Size . . . . . . . . . . . . . .30A ATO style
Dimensions without Endcaps . . . . . .8.4L x 10.0W x 2.35H
Dimensions with Endcaps . . . . . . . .13.4L x 10.0W x 2.35H
Tantrum 500.2
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . .50 x 2
Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .125 x 2
Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .250 x 2
Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .500 x 1
Recommended Fuse Size . . . . . . . . . . .30A x 2 ATO style
Dimensions without Endcaps . . . . .11.75L x 10.0W x 2.35H
Dimensions with Endcaps . . . . . . .16.75L x 10.0W x 2.35H
Common Specifications
Frequency Response . . . . . . . . . . . .±1dB, 20Hz to 20kHz
Signal to Noise Ratio (A-weighted) . . . . . . . . . . . . .>100dB
Input Sensitivity . . . . . . . . . . . . . . . .100 millivolts to 4 volts
Crossover Frequency . . . . . . . . . . . . . . . . .40Hz to 800Hz
Crossover Slope . . . . . . . . . . . . . . . . . . .18dB per Octave
Bass Boost . . . . . . . . . . . . . . . . . . . . .0 to +18dB @ 45Hz
DC Input Voltage Range . . . . . . . . . . .10 volts to 15.5 volts
Typical Current Draw at Idle . . . . . . . . . . . . . . . . .
Minimum Bridged Load . . . . . . . . . . . . . . . . . . . . . .2 ohms
Minimum Stereo Load . . . . . . . . . . . . . . . . . . . . . . .1 ohm
Maximum Power Load . . .4 ohms bridged or 2 ohms stereo
