Pa A3000db

[stish05 10+ year member]

approximetly what rms wattage would the PA 3000DB have at 1.5 ohms..?

Click to read more...

 

[skeptikal Premium Member]

i'd say ~2k rms @ 1.5 ohms

2 ohms = 1800

1 ohm = 2300

so just a guesstimate

 

[300m_on_xxx 10+ year member]

i'd say ~2k rms @ 1.5 ohms
2 ohms = 1800

1 ohm = 2300

so just a guesstimate

x2 i have to say around 2k

 

[n2audio 5,000+ posts]

x2 i have to say around 2k

Not buyin' it. I know that one mag article got it at 2300w, but I don't even think they accounted for clipping. Plus - it's basically the same board as the Optidrive 2000D which is 1900w at 1/2 ohm. 1600@ 1. I'd bet 1400ish at 1.5.

 

[AznRevlAzn 10+ year member]

you do realize that these amps were meant for burping not intentionally for daily use unless set correctly //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Mr. Loki 5,000+ posts]

thats right, because i can tell you first hand a single pa 3000db of mine tested on a quad dd 9915 surely didnt have a problem at .5 load for a solid 5 minutes. Its a solid amp and the lanzar opti series is the best amp they offer. My guess is it would give you 2k at 1.5 ohm load, but I dont understand why you cant drop it to a even 1ohm load?

 

[saywhat? 5,000+ posts]

maybe his coils?

 

[Mr. Loki 5,000+ posts]

I know that, but im wondering what he will be powering for the amp to see a 1.5ohm load. Quads?