orion/memphis wiring 2 ohm

[518wrx 10+ year member]

whats up all, my question is, i have a 2 chan memphis st1000.1 and an orion xtr900 2 chan. i have a mtx thunder 9512 in a ported box thats dual 4 ohm, which means i can run it at 2 or 8 ohms. on my amps i have 2 chan left and right. now it doesnt have a bridge sign on the amps and i need to know how to put the wire into the amp from the speaker.(both amps) should i just run it off one side or something else? also which amp would be more beneficial?i know they arent the ideal amps for this sub but its all i got right now. thanks allot guys n gals

specs:memphis

Studio Series

1 x 300W @ 4 ohms (0.75% THD)

1 x 600W @ 2 ohms (1.0% THD)

1 x 1100W @ 1 ohm (1.2% THD)

S/N Ratio: >95dB

Freq. Response: 10Hz ∼ 650Hz (± 1dB)

Efficiency: 90%

Fuse: 2 x 40A

(Can this be bridged?? at 2 ohm??)how many watts will it be giving??

orion:Xtreme 9002

Output Power at 13.8V, 20Hz ∼ 20kHz,

2 x 225W @ 4 ohms

2 x 450W @ 2 ohms

1 x 900W @ 4 ohms bridge

THD:

Freq. Response: 20Hz ∼ 20kHz (±0.25dB)

Linear Bandwidth: 6Hz ∼ 50kHz (±3dB)

S/N Ratio: >100dB (full bandwidth, rated power)

Damping Factor: >400 (at output connector, full bandwidth)

Fuse: 2 x 30A

Dimensions: 18" x 10.25" x 2.25" (45.7cm x 26cm x 5.7cm)

Manufactured in 2001.

Click to read more...

 

[ICHASEPAPER2010]

run the memphis

 

[518wrx 10+ year member]

how should i put the wire in the amp ??? also how many watts are coming out of just one channel? is it only 300 cuz its only one side?? or should i run 2 wires from the sub so i can hook it to the left and right side??

 

[pr-festiva 10+ year member]

the st1000d is a mono the two sets of terminals are just for ease of wireing,in that situation run the memphis

 

[518wrx 10+ year member]

so this is ok??

 

[518wrx 10+ year member]

sorry bout the huge pic dunno y it came out like that

 

[518wrx 10+ year member]

this is my system:

 

[pr-festiva 10+ year member]

yes thats fine,,why is there two different color wires going in to one hole?,just trying to make a bigger gauge?

 

[518wrx 10+ year member]

yes thats fine,,why is there two different color wires going in to one hole?,just trying to make a bigger gauge?

yea, i doubled it up for the pos and neg

 

[x2o 10+ year member]

Looks fine to me //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 

[518wrx 10+ year member]

im looking at getting a autotek sx2300 700......... it will put 800watts at 2 ohm stable but im not sure if i want to change where my amp is, the memphis is the smallest one i can find that has a decent amount of power(600 @2OHMS)....and i like how it looks and functions folding up with my armrest so i can hide it and show it to let it cool properly. but i know this sub is starving for power.

 

[pr-festiva 10+ year member]

you could allways get a dual 2 sub