Older RE SE power handleing

600w is no sweat for an OLD SE. As long as it's not the newer Chinese version, it will handle 800w rms or so.

A good indication of the Chinese models is that the cone will say RE, then SE in smaller print on the bottom. If his is has the logos in that way, it will only take around 500w.

 
No sir, they were not. We rated them at 600w rms.
I stand corrected

Mounting Depth - 6.4"Mounting Hole Diameter - 9.3"

Overall Diameter - 11"

Bolt Hole Circle - 10.1"

Motor Width - 7.3"

Motor Depth - 3.4"

Basket Depth - 2.94"

Displacement - 0.14 cu. ft.

Weight - 21 lbs.

Electrical Q Value -Qes: 0.46

Mechanical Q Value -Qms: 4.4

Total Speaker Q Value -Qts: 0.42

Free Air Resonance -Fs: 26.6 Hz

Equivalent Compliance -Vas: 31 liters

One-Way, Linear Excursion -Xmax: 18 mm

Efficiency -SPL 1W/1m: 83.2 dB SPL

Effective Piston Area -Sd: 310 cm^2

DC Resistance -Re: 2.8 ohm

Nominal Impedance -Znom: Dual 2/4 ohm

Thermal Power Handling -Pe: 600 W

Force Factor -Bl: 17.7
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

BrownVanMan

10+ year member
CarAudio.com Veteran
Thread starter
BrownVanMan
Joined
Location
Minneapolis MN
Start date
Participants
Who Replied
Replies
15
Views
1,141
Last reply date
Last reply from
BrownVanMan
1781975538525.png

Doxquzme

    Jun 20, 2026
  • 0
  • 0
1781975510897.png

Doxquzme

    Jun 20, 2026
  • 0
  • 0

New threads

Top