This is a Punch 120 a2.$75 Shipped OBO I am getting ratings on it but the sticker on the back says 30 @ 4 ohms and 60 @ 2 ohms. Its a 2 channel, great for co-axs/components. I cant find anymore ratings on it other than that but im guessing since its old that its proly a little under rated. I believe its bridgable.
Also Pioneer GM-3000T - I will take $85 Shipped OBO
- Load Impedance Capability: 2- 8 Ohm (Stereo), 4-8 Ohm (Bridged).
- Continuous Power (4 ohm): 40W x 2.
- Continuous Power (2 ohm): 50W x 2.
- Continuous Power Bridged (4 ohm): 100W x 1.
- Frequency Response: 10Hz ~ 45kHz.
- Total Harmonic Distortion: 0.008%.
- Signal-to-Noise Ratio: 100dB.
- Dimensions: 12" x 2-3/8" x 6-1/8".
- Bridgeable.
- Channel # Capability: 1/2/3.
- PWM Regulated MOSFET Power Supply.
- Screw-Type Speaker Terminals.
- Balanced Isolator Input Circuit.
- RCA Inputs: 2 Channel.
- Speaker Level Input: 2 Channel.
- Input Level Control: Hi-Volt (400mV - 6.5V).
- Built-in Crossover: Selectable LPF (80Hz, -12dB/Oct.).
I have 2 boxes for a single 12". Measurements are 13.75" X 3, i belive its 1.03 Cubic Feet. Carpeted. I have 1 with a terminal cup and 1 without so the first person get the one with. Ill let these go for $25 + actual shipping.
I have a Truck box for 2 12"s. I have measurements somewhere and i will get them. I believe its 1.25 Cubic feet per chamber. Termianl cups are there. Carpet is perfect. Subs in picture not included. $60 + actual shipping
I have 2 MTX older Road Thunder 8" subs - 4 ohm, i believe 200 RMS. I have the original MTX Ported boxes with tweeters or i have sealed boxes that will work as well. The sealed boxes need carpetingor something and terminal cups. $80 Shipped with ported boxes and $65 shipped with sealed. Also have grills that are painted red to match the MTX logo. I can take pix of boxes depending on which ones you want.
Also Pioneer GM-3000T - I will take $85 Shipped OBO
- Load Impedance Capability: 2- 8 Ohm (Stereo), 4-8 Ohm (Bridged).
- Continuous Power (4 ohm): 40W x 2.
- Continuous Power (2 ohm): 50W x 2.
- Continuous Power Bridged (4 ohm): 100W x 1.
- Frequency Response: 10Hz ~ 45kHz.
- Total Harmonic Distortion: 0.008%.
- Signal-to-Noise Ratio: 100dB.
- Dimensions: 12" x 2-3/8" x 6-1/8".
- Bridgeable.
- Channel # Capability: 1/2/3.
- PWM Regulated MOSFET Power Supply.
- Screw-Type Speaker Terminals.
- Balanced Isolator Input Circuit.
- RCA Inputs: 2 Channel.
- Speaker Level Input: 2 Channel.
- Input Level Control: Hi-Volt (400mV - 6.5V).
- Built-in Crossover: Selectable LPF (80Hz, -12dB/Oct.).
I have 2 boxes for a single 12". Measurements are 13.75" X 3, i belive its 1.03 Cubic Feet. Carpeted. I have 1 with a terminal cup and 1 without so the first person get the one with. Ill let these go for $25 + actual shipping.
I have a Truck box for 2 12"s. I have measurements somewhere and i will get them. I believe its 1.25 Cubic feet per chamber. Termianl cups are there. Carpet is perfect. Subs in picture not included. $60 + actual shipping
I have 2 MTX older Road Thunder 8" subs - 4 ohm, i believe 200 RMS. I have the original MTX Ported boxes with tweeters or i have sealed boxes that will work as well. The sealed boxes need carpetingor something and terminal cups. $80 Shipped with ported boxes and $65 shipped with sealed. Also have grills that are painted red to match the MTX logo. I can take pix of boxes depending on which ones you want.
