Oh Yeah......oldschool MTX

[blackMTXgold 10+ year member]

Alright well i have a MTX Black Gold 10" single 4ohm that was made in 1994, and i just got the specs from mtx on it..........pretty cool i thought

Nominal Impedance....4 ohms

RE (DC Resistance).....3.27 ohms

LEVC (Coil Inductance).....1.03 mH

SPLO (Reference Efficiency) @1W/1M.....87 dB

Frequency Response (+/-3dB)....... 17-2 kHz

FO (Free Air Resonance)...... 17Hz

QMS (Mechanical Q).....4.32

QES (Electrical Q)..... .34

QTS (Total Q)........ .31

BL (Force Factor)..... 7.3 N/A

Effective Piston Diameter.... 7.87 in.

VAS( Volume Acoustic Suspension)..... 9.04 cu. ft

XMAX (excursion)....... .36in

RMS........ 150 watts

Mounting Diameter.......... 9 1/4 in.

mounting Depth........ 4 9/16 in.

Speaker Displacement (inside box) 275 cu. In.

Speaker Displacement (Outside Box) 160 cu. in.

//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

Click to read more...

 

[blackMTXgold 10+ year member]

-38 oz Strontium Ferrite Magnet

-2" Thermally Conductive Black Kapton Voice Coil Former

-10" Molded and Treated Long Fiber Composite Cone

-Thermo-formed poly Dustcap

-Butyl Rubber Surround

-Perimeter and Pole Piece Cooling System

-Gold Plated Five-Way Binding Post

-Black Plated Top Plate, Bottom Plate and pole piece

 

[DBfan187 5,000+ posts]

annnnnnnnnnnd what is the question?

 

[blackMTXgold 10+ year member]

oh yeh lmfao srry bout that, if i go ported on this what would someone recommend

 

[DBfan187 5,000+ posts]

1.25cF 35Hz with one 4" areoport.

 

[60_cent 10+ year member]

the black and gold series was bad a**

I had the black and gold series 2300 amp rated at 150 x 2 or 600 x1 at 4 ohms. It was a nice amp and was pushing two HX2 15's hard....