Official CarAudio.com Big 3 Thread

[Johnny Law.Lulz 5,000+ posts]

Well he told me that the way some alternators are wired that it wont work because you cant change it. I take the words of you hundreds to the fact it works but is it a universal modification or is there alternators you cant do it to

 

[99grandprixGT 5,000+ posts]

Well he told me that the way some alternators are wired that it wont work because you cant change it. I take the words of you hundreds to the fact it works but is it a universal modification or is there alternators you cant do it to

. what year and car do you have?

 

[FREAKY BEHAVIOR 10+ year member]

NEWB QUESTION.

do i need to buy a new alternator and battery to do THE BIG 3?

do i need 2 batteries?

pics in the tutorial would help out alot.

 

[jco1385 5,000+ posts]

i feckin posted pics a few pages back...

big 3 is 3 "big" wires. no need for a 2nd battery, or a new alternator.

 

[FREAKY BEHAVIOR 10+ year member]

what is the big 3 called in technical terms?

any pics of the chassis wire to engine block?

 

[jco1385 5,000+ posts]

the big 3...

did you read anything about it? it's pretty self-explanatory //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[jco1385 5,000+ posts]

it's the first feckin post in THIS THREAD. read it. be learned

 

[FREAKY BEHAVIOR 10+ year member]

When i ground the chassis to the motor. do i find a new hole on the chasis or use the same one from the battery?

 

[jco1385 5,000+ posts]

engine to battery neg + chassis to battery neg = chassis to engine

why does no one understand that?

 

[PuZo 10+ year member]

engine to battery neg + chassis to battery neg = chassis to engine
why does no one understand that?

Was just gonna ask is that why there is 2 wires hooked up to my negative? Since ill be putting 1/0 awg whats the best way to connect it to the battery, some sort of terminal cause im also gonna need space to hook up an extra battery

 

[jco1385 5,000+ posts]

Was just gonna ask is that why there is 2 wires hooked up to my negative? Since ill be putting 1/0 awg whats the best way to connect it to the battery, some sort of terminal cause im also gonna need space to hook up an extra battery

you should have 3 neg wires at the battery.

1. stock wire

2. engine ground

3. chassis ground

4. IF YOU GROUNDED REAR BATTERY TO FRONT BATTERY

you should have 3 on the positive side at the battery

1. stock wire

2. alt to battery

3. run to the amp. (or rear battery)

am i missing something?

 

[Buck 5,000+ posts]

you should have 3 neg wires at the battery.
1. stock wire

2. engine ground

3. chassis ground

you should have 3 on the positive side at the battery

1. stock wire

2. alt to battery

3. run to the amp.

am i missing something?

That there are some idiots on this forum?

 

[jco1385 5,000+ posts]

revised

 

[PuZo 10+ year member]

you should have 3 neg wires at the battery.
1. stock wire

2. engine ground

3. chassis ground

4. IF YOU GROUNDED REAR BATTERY TO FRONT BATTERY

you should have 3 on the positive side at the battery

1. stock wire

2. alt to battery

3. run to the amp. (or rear battery)

am i missing something?

Is this after I'm done the Big3? And my grounded rear to front you mean connect them in parallel/series.

And wait, do I leave the stock cable there? I thought I need to replace them, or am I just adding on more?

 

[jco1385 5,000+ posts]

thats after battery and big 3. i'd leave the stock wire, as it may go to a fuse box somewhere. some people take them out though.

and the battery should be in parallel (+ to +, - to -)