nightshades 18s with 3500 rms on each

gtbike900
10+ year member

1loudyukonxl
796
0
ohio
im a little worried will my 18 inch nightshades take 3500 rms each? there will be 2 saz4500s strapped at 1 ohm on 16v on 4 nightshade 18s in 19.5 cubes gross 16 cubes net after displacement with 4 6 inch aeros tuned to 27 htzs

 
im about to build a test box for 2 9.86 cubes gross and 8.4 cubes after dis with 2 6 inch aeros tuned to 28.4hrz on 1 saz4500 at .5 16v

 
I like the article, but that from the article I know maybe we can be good friends.//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 
I wouldnt run music daily at 3500 rms, that will sure heat them up super fast. Rule of thumb on a 3" coil subs, true power is 1200 rms on a good aluminum flat wire coil. With 1200 rms on that you can play it 24/7/365, thats true RMS when it can handle it all the time! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
I wouldnt run music daily at 3500 rms, that will sure heat them up super fast. Rule of thumb on a 3" coil subs, true power is 1200 rms on a good aluminum flat wire coil. With 1200 rms on that you can play it 24/7/365, thats true RMS when it can handle it all the time! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Cool story bro, I'm sure motor design has nothing to do with how much power a woofer can handle.//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

Drew

 
there seeing about 3000 rms right now so 1500 each and there fine the only time i smell them is when im clipping them

 
3500 RMS measured power = too much

Your average power on music with a typical impedance curve... probably going to be okay. Just pay attention to them //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
I know Jbizzle had a 3500 on each of his 18's no problem. Like everyone else said just be smart about it and u should be ok //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yeah well im a maintenance technician working 12 hr days 6 days a wk ontop of school 3 times a wk which are 4 hrs long .so ya an hr drive is hard...
2
1K
Yes, they do. As for the Taramps remote control, it is for use with the EQ they sell, not as a remote bass knob. They are not very sophisticated...
24
4K

About this thread

gtbike900

10+ year member
1loudyukonxl
Thread starter
gtbike900
Joined
Location
ohio
Start date
Participants
Who Replied
Replies
49
Views
2,063
Last reply date
Last reply from
hrtbrk1
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top