New to Car Audio. Few Questions.

Serpent710
10+ year member

CarAudio.com Veteran
Hello, this is my first post and saw there was a ton of helpful people on this forum. i am just getting started into car audio and have a few questions. I recently purchased 2 of the Cerwin Vega 12.2 subs. They are the newer silver ones. I have a sealed box that is 1.5 cu ft per chamber. And i am using this amp http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?Source=googlebase&ProductID=17789

Would this amp power the cerwins decently? i know it wont fully power them at all since they are 600watts rms each. The amp is 500 rms @ 2ohms. BTW i am upgraded from 2 10" sony xplods which are crap which im sure all of you know already. Will i see a difference between the 2 10" sonys and the 2 12" cerwin vmax subs? and one last question. how would i wire the 2 dvc 2 ohm subs to get a 2 ohm load from the amp? thanks.

 
if u have a pair of subs that needs 600 RMS, that means u need an amp that will make 1,200 RMS at the particular ohm load u will be wiring to it. seeing that u are using a 500 rms amp, (i don't know the ohm load of the subs or the load they got the 500 watts from) best case u will be giving each sub 250 RMS. with that being said. u could possably get another of the same amp and be running each sub from one amp. but remeber, this is if the ohm rating is working in your favor. i'll look for a bit and let u know.

 
ahh, my fault. i didn't look at the v-max.

with 2 D2 subs u can make your final ohm load is 2. the lowest yours is able to go is 2. so that will give u 250 each. however, u wouldn't beable to do one of those amps to one sub since they wouldn't be able to do 2 ohm to it, only 1 or 4.

 
i will be wiring them both to 2 ohm load if that is possible?? By the way will i see a difference in the sonys and the cerwins?
your wiring option PER sub is eather 1 or 4. the amp won't do 1 ohm. and if u give it 4 ohm off one sub then your basicly getting 250w again.

 
yup. will i see a differnce by going from the sony xplod 10"s to the vmax 12"s? louder? better quality? the cerwins will be running off the same amp the xplods were. The specs on the cerwins are way better such as the xmax on the sonys were 6mm and the xmax on the cerwins are 17mm which i will not get cause of the amp power.

 
no lie...i will probably sound like a newb...but one of my co-workers gave me ride to pizza hut last night...he had 2 xplods...thye didnt really sound great...but they got decently loud for 300 watts piece...the common person...really doesnt know what GOOD subs sound like

they didnt sound good...

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Serpent710

10+ year member
CarAudio.com Veteran
Thread starter
Serpent710
Joined
Location
Florida
Start date
Participants
Who Replied
Replies
14
Views
553
Last reply date
Last reply from
KingSham
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top