New SSA Dcon almost ready...

[denim 5,000+ posts]

Photos are done, specs and enclosure info will be up soon. Below are shots of the new Dcon 10, it is a shallow mount. It is still a great SQ option that blends really well, and can have authoritative output on modest power. The newer design has greater cooling and more motor force along with a little more power handling and enclosure flexibility than the original Dcon.

 

Sub Woofers - SoundSolutionsAudio - DCON - SSA STORE

Click to read more...

 

[Freeman]

looks śexy //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

 

[globalminds_ent 10+ year member]

Ssa has to have some of best looking subs, with performance to match, love how the motor is extended like that.

 

[denim 5,000+ posts]

looks śexy //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

//content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif :emb:

 

[denim 5,000+ posts]

Ssa has to have some of best looking subs, with performance to match, love how the motor is extended like that.

Why thank you. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[St.Zu]

Any idea on depth?

 

[2002XLT 5,000+ posts]

Have any info yet? Definitely interested.

 

[SounDrive Pro Seller]

Have any info yet? Definitely interested.

Same here. I may have a couple of installs coming up soon that this would be perfect for. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[denim 5,000+ posts]

Here are the PRE-PRODUCTION specs:

 

DCON10

 

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)

FS 29.6 Hz

QMS 4.51

Qes .31

Qts .29

Mms 111g

Vas 35.0 l

SD 310 cm^2

BL 22.8 15.05 (S4 coil)

SPL 86.5 1W/1m

 

 

DCON12

 

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)

FS 28.1 Hz

QMS 4.98

Qes .34

Qts .32

Mms 136g

Vas 78.1 l

SD 480 cm^2

BL 22.8 15.05 (S4 coil)

SPL 89.2 1W/1m

 

 

DCON15

 

DCR 7.8 Ohms (D4 wired in series) 3.4 (S4 coil)

FS 32.5 Hz

QMS 5.66

Qes .45

Qts .42

Mms 148g

Vas 149.2 l

SD 810 cm^2

BL 22.8 15.05 (S4 coil)

SPL 92.4 1W/1m

 

[2002XLT 5,000+ posts]

Mounting depth?

 

[denim 5,000+ posts]

Mounting depth?

I post them up soon, forgot to grab them in the craziness lately.

 

[2002XLT 5,000+ posts]

No problem. I understand. Also if you could tell me how much sealed or ported air space they need. And what you would safely consider a daily rms range. If they will fit id like to put 2 10s in my truck. Thanks.

 

[denim 5,000+ posts]

No problem. I understand. Also if you could tell me how much sealed or ported air space they need. And what you would safely consider a daily rms range. If they will fit id like to put 2 10s in my truck. Thanks.

Enclosure wise, they are not far off from a mix between the original Dcon and the Gcon. Not knowing listening habits or power, for a pair of 10's sealed, I would do around 1.5 cubes with maybe a pound or so of polyfill, and ported I would aim for 2.2 cubes tuned in the 31hz range.

 

Power wise, 400 is plenty. I pushed it pretty far past that, but that was more for abuse testing. So going over 500 is not really needed, 300-400 is plenty and a nice sweet spot.

 

[2002XLT 5,000+ posts]

Do you think they would be ok with 1.05 sealed? That's about how much room I will have under the seats. Also I've got about 6" mounting depth to work with. Do-able?

 

[denim 5,000+ posts]

Do you think they would be ok with 1.05 sealed? That's about how much room I will have under the seats. Also I've got about 6" mounting depth to work with. Do-able?

That is tight, but could work with some polyfill/acoustastuff. Is that mounting depth allowing for space in front of the cone?