new project!!! need advice

stanza
10+ year member

Member
76
0
MD
I have a GMC sierra Reg. cab so my space is limited... so heres my plan.

Two Alpine Type S SWS 1043 subwoofers at 300 RMS (1 cubic ft recommended air space)

T600-2 Rockford Fosgate amplifier RMS 300 watts x2 at 2ohms.

Im going to run the two subs in parrallel to a 2 ohm load, 300 watts out of each channel. I found two boxes online that will fit in my truck and have an air space of .98 cubic ft (Alpine recommends 1.0 cubic ft air space for these subs). The mounting depth for the subs is 4.4" and the mounting depth in the boxes is 5.5".

So what do you guys think? I can get a dual enclosed box that will fit my truck with 1.98 cubic ft. air space per sub. Do you guys think i should stick with the single enclosed boxes with .98 cubic ft air space or get the dual enclosed box with an extra 1 inch cubic ft air space?

 
Everyone's gunna say don't buy prefab boxes but if its just a sealed box I don't see the big deal common chamber or shared doesn't matter whatever fits and aslong as its wired correctly will be fine

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

stanza

10+ year member
Member
Thread starter
stanza
Joined
Location
MD
Start date
Participants
Who Replied
Replies
2
Views
517
Last reply date
Last reply from
dumple
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top