New Box

[orangecounty1 10+ year member]

lmao

 

[ngsm13 5,000+ posts]

I dont see how Tommy Mckinnie does it with 24 subs. I only have 6 and it sucked *** to wire them up! =D

Yeah, wired mine up with some 8guage distro's...

nG

 

[TeamPSI 10+ year member]

I used bolts through the back wall of the box.

 

[TeamPSI 10+ year member]

Omg!

 

[TeamPSI 10+ year member]

I should be able to get the wire run and the new battery tray welded tomorrow. My other amp should be in Monday or tuesday, so it shouldnt be long now!

 

[TeamPSI 10+ year member]

Ok... since nobody is interested....

Ive actually had the subs in for a week. I only have an MD3D on them.

I still need to install my 2 20.1's, a few runs of 1/0 and weld a new battery tray for my 2nd pc2150 before I'll even consider this semi-done.

Its loud though. About 6db louder than my 15" MT on this same MD3.

Think 2 20.1's strapped at 1 ohm might out-do this MD3 at 1.0? =]





The window flexes a good bit, but I think it might move a little farther pretty soon. Its hard to see from the video. I got it from my phone.

=] The subs are starved for power right now... 300w each? Bleh

 

[iamamp3pimp 5,000+ posts]

looks like someone took that video at just the right angle to make it impossible to tell what they are.

besides that the amps will be fine....and hopefully it will be louder than my car used to me.

but im not so sure that it will be louder than my car will be.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[iamamp3pimp 5,000+ posts]

and wiring them shits up sucks, i have enough trouble doing it with 2 subs....ive done the bolts through the wall.

fucc that....its cool, but dont look so pretty.

maybe i should do it on mine now since i have the beauty panel in.

then i have to take it all apart to change the coil config on the subs.

o well, ill get it figured out.

 

[18inchjeepin 10+ year member]

Nice I love seeing multiple subs moving, maybe i'll have 2 very soon

 

[IA2 10+ year member]

I think you copied my Explorer box //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif But I used seven 4" aeros and was about a foot narrower

 

[orangecounty1 10+ year member]

looks like someone took that video at just the right angle to make it impossible to tell what they are.
besides that the amps will be fine....and hopefully it will be louder than my car used to me.

but im not so sure that it will be louder than my car will be.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

lol

you dont like people being louder than you //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

although youve told me that you "kinda hope" im louder so you have competition

and yesterday you said you will laugh when my box breaks //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif

 

[iamamp3pimp 5,000+ posts]

its true

 

[orangecounty1 10+ year member]

get on aim

 

[TeamPSI 10+ year member]

Here's my old battery setup. Just a PC2150 in a tray I welded up one day.

I doubled the tray up today and now I have 2 of them facing each other under the hood.

I still need to connect the 1/0 power runs to the battery but I don't have my other amp yet anyway. I also need to make a new top clamping bar tomorrow too.

I have a 300 amp HOalternators alt in there too.

I ran 50ft of 1/0 under the truck and through the rear floor today. Ill get pics tomorrow. My other 20.1 will be here tomorrow. Its time to bang!! =]

 

[ngsm13 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif

About times...

nG